initial commit

This commit is contained in:
rayelliott 2020-10-24 21:26:14 +00:00
commit d2c6e2aeff
2 changed files with 1109 additions and 0 deletions

565
bindings Normal file
View File

@ -0,0 +1,565 @@
##############################################################
## This is the example bindings file. Copy it to ##
## ~/.ncmpcpp/bindings or $XDG_CONFIG_HOME/ncmpcpp/bindings ##
## and set up your preferences ##
##############################################################
##
##### General rules #####
##
## 1) Because each action has runtime checks whether it's
## ok to run it, a few actions can be bound to one key.
## Actions will be bound in order given in configuration
## file. When a key is pressed, first action in order
## will test itself whether it's possible to run it. If
## test succeeds, action is executed and other actions
## bound to this key are ignored. If it doesn't, next
## action in order tests itself etc.
##
## 2) It's possible to bind more that one action at once
## to a key. It can be done using the following syntax:
##
## def_key "key"
## action1
## action2
## ...
##
## This creates a chain of actions. When such chain is
## executed, each action in chain is run until the end of
## chain is reached or one of its actions fails to execute
## due to its requirements not being met. If multiple actions
## and/or chains are bound to the same key, they will be
## consecutively run until one of them gets fully executed.
##
## 3) When ncmpcpp starts, bindings configuration file is
## parsed and then ncmpcpp provides "missing pieces"
## of default keybindings. If you want to disable some
## bindings, there is a special action called 'dummy'
## for that purpose. Eg. if you want to disable ability
## to crop playlists, you need to put the following
## into configuration file:
##
## def_key "C"
## dummy
##
## After that ncmpcpp will not bind any default action
## to this key.
##
## 4) To let you write simple macros, the following special
## actions are provided:
##
## - push_character "character" - pushes given special
## character into input queue, so it will be immediately
## picked by ncmpcpp upon next call to readKey function.
## Accepted values: mouse, up, down, page_up, page_down,
## home, end, space, enter, insert, delete, left, right,
## tab, ctrl-a, ctrl-b, ..., ctrl-z, ctrl-[, ctrl-\\,
## ctrl-], ctrl-^, ctrl-_, f1, f2, ..., f12, backspace.
## In addition, most of these names can be prefixed with
## alt-/ctrl-/shift- to be recognized with the appropriate
## modifier key(s).
##
## - push_characters "string" - pushes given string into
## input queue.
##
## - require_runnable "action" - checks whether given action
## is runnable and fails if it isn't. This is especially
## useful when mixed with previous two functions. Consider
## the following macro definition:
##
## def_key "key"
## push_characters "custom_filter"
## apply_filter
##
## If apply_filter can't be currently run, we end up with
## sequence of characters in input queue which will be
## treated just as we typed them. This may lead to unexpected
## results (in this case 'c' will most likely clear current
## playlist, 'u' will trigger database update, 's' will stop
## playback etc.). To prevent such thing from happening, we
## need to change above definition to this one:
##
## def_key "key"
## require_runnable "apply_filter"
## push_characters "custom_filter"
## apply_filter
##
## Here, first we test whether apply_filter can be actually run
## before we stuff characters into input queue, so if condition
## is not met, whole chain is aborted and we're fine.
##
## - require_screen "screen" - checks whether given screen is
## currently active. accepted values: browser, clock, help,
## media_library, outputs, playlist, playlist_editor,
## search_engine, tag_editor, visualizer, last_fm, lyrics,
## selected_items_adder, server_info, song_info,
## sort_playlist_dialog, tiny_tag_editor.
##
## - run_external_command "command" - runs given command using
## system() function.
##
## 5) In addition to binding to a key, you can also bind actions
## or chains of actions to a command. If it comes to commands,
## syntax is very similar to defining keys. Here goes example
## definition of a command:
##
## def_command "quit" [deferred]
## stop
## quit
##
## If you execute the above command (which can be done by
## invoking action execute_command, typing 'quit' and pressing
## enter), ncmpcpp will stop the player and then quit. Note the
## presence of word 'deferred' enclosed in square brackets. It
## tells ncmpcpp to wait for confirmation (ie. pressing enter)
## after you typed quit. Instead of 'deferred', 'immediate'
## could be used. Then ncmpcpp will not wait for confirmation
## (enter) and will execute the command the moment it sees it.
##
## Note: while command chains are executed, internal environment
## update (which includes current window refresh and mpd status
## update) is not performed for performance reasons. However, it
## may be desirable to do so in some situration. Therefore it's
## possible to invoke by hand by performing 'update enviroment'
## action.
##
## Note: There is a difference between:
##
## def_key "key"
## action1
##
## def_key "key"
## action2
##
## and
##
## def_key "key"
## action1
## action2
##
## First one binds two single actions to the same key whilst
## second one defines a chain of actions. The behavior of
## these two is different and is described in (1) and (2).
##
## Note: Function def_key accepts non-ascii characters.
##
##### List of unbound actions #####
##
## The following actions are not bound to any key/command:
##
## - set_volume
##
#
#def_key "mouse"
# mouse_event
#
def_key "j"
scroll_down
def_key "k"
scroll_up
def_key "down"
move_selected_items_down
def_key "up"
move_selected_items_up
#def_key "up"
# scroll_up
#
#def_key "shift-up"
# select_item
# scroll_up
#
#def_key "down"
# scroll_down
#
#def_key "shift-down"
# select_item
# scroll_down
#
#def_key "["
# scroll_up_album
#
#def_key "]"
# scroll_down_album
#
#def_key "{"
# scroll_up_artist
#
#def_key "}"
# scroll_down_artist
#
#def_key "page_up"
# page_up
#
#def_key "page_down"
# page_down
#
#def_key "home"
# move_home
#
#def_key "end"
# move_end
#
#def_key "insert"
# select_item
#
#def_key "enter"
# enter_directory
#
#def_key "enter"
# toggle_output
#
#def_key "enter"
# run_action
#
#def_key "enter"
# play_item
#
def_key "space"
pause
#def_key "space"
# add_item_to_playlist
#
#def_key "space"
# toggle_lyrics_update_on_song_change
#
#def_key "space"
# toggle_visualization_type
#
#def_key "delete"
# delete_playlist_items
#
#def_key "delete"
# delete_browser_items
#
#def_key "delete"
# delete_stored_playlist
#
#def_key "right"
# next_column
#
#def_key "right"
# slave_screen
#
#def_key "right"
# volume_up
#
#def_key "+"
# volume_up
#
#def_key "left"
# previous_column
#
#def_key "left"
# master_screen
#
#def_key "left"
# volume_down
#
#def_key "-"
# volume_down
#
#def_key ":"
# execute_command
#
#def_key "tab"
# next_screen
#
#def_key "shift-tab"
# previous_screen
#
#def_key "f1"
# show_help
#
#def_key "1"
# show_playlist
#
#def_key "2"
# show_browser
#
#def_key "2"
# change_browse_mode
#
#def_key "3"
# show_search_engine
#
#def_key "3"
# reset_search_engine
#
#def_key "4"
# show_media_library
#
#def_key "4"
# toggle_media_library_columns_mode
#
#def_key "5"
# show_playlist_editor
#
#def_key "6"
# show_tag_editor
#
#def_key "7"
# show_outputs
#
#def_key "8"
# show_visualizer
#
#def_key "="
# show_clock
#
#def_key "@"
# show_server_info
#
#def_key "s"
# stop
#
#def_key "p"
# pause
#
#def_key ">"
# next
#
#def_key "<"
# previous
#
#def_key "ctrl-h"
# jump_to_parent_directory
#
#def_key "ctrl-h"
# replay_song
#
#def_key "backspace"
# jump_to_parent_directory
#
#def_key "backspace"
# replay_song
#
#def_key "f"
# seek_forward
#
#def_key "b"
# seek_backward
#
#def_key "r"
# toggle_repeat
#
#def_key "z"
# toggle_random
#
#def_key "y"
# save_tag_changes
#
#def_key "y"
# start_searching
#
#def_key "y"
# toggle_single
#
#def_key "R"
# toggle_consume
#
#def_key "Y"
# toggle_replay_gain_mode
#
#def_key "T"
# toggle_add_mode
#
#def_key "|"
# toggle_mouse
#
#def_key "#"
# toggle_bitrate_visibility
#
#def_key "Z"
# shuffle
#
#def_key "x"
# toggle_crossfade
#
#def_key "X"
# set_crossfade
#
#def_key "u"
# update_database
#
#def_key "ctrl-s"
# sort_playlist
#
#def_key "ctrl-s"
# toggle_browser_sort_mode
#
#def_key "ctrl-s"
# toggle_media_library_sort_mode
#
#def_key "ctrl-r"
# reverse_playlist
#
#def_key "ctrl-f"
# apply_filter
#
#def_key "ctrl-_"
# select_found_items
#
#def_key "/"
# find
#
#def_key "/"
# find_item_forward
#
#def_key "?"
# find
#
#def_key "?"
# find_item_backward
#
#def_key "."
# next_found_item
#
#def_key ","
# previous_found_item
#
#def_key "w"
# toggle_find_mode
#
#def_key "e"
# edit_song
#
#def_key "e"
# edit_library_tag
#
#def_key "e"
# edit_library_album
#
#def_key "e"
# edit_directory_name
#
#def_key "e"
# edit_playlist_name
#
#def_key "e"
# edit_lyrics
#
#def_key "i"
# show_song_info
#
#def_key "I"
# show_artist_info
#
#def_key "g"
# jump_to_position_in_song
#
#def_key "l"
# show_lyrics
#
#def_key "ctrl-v"
# select_range
#
#def_key "v"
# reverse_selection
#
#def_key "V"
# remove_selection
#
#def_key "B"
# select_album
#
#def_key "a"
# add_selected_items
#
#def_key "c"
# clear_playlist
#
#def_key "c"
# clear_main_playlist
#
#def_key "C"
# crop_playlist
#
#def_key "C"
# crop_main_playlist
#
#def_key "m"
# move_sort_order_up
#
#def_key "m"
# move_selected_items_up
#
#def_key "n"
# move_sort_order_down
#
#def_key "n"
# move_selected_items_down
#
#def_key "M"
# move_selected_items_to
#
#def_key "A"
# add
#
#def_key "S"
# save_playlist
#
def_key "o"
enter_directory
def_key "o"
select_item
scroll_down
#def_key "o"
# jump_to_playing_song
#
#def_key "G"
# jump_to_browser
#
#def_key "G"
# jump_to_playlist_editor
#
#def_key "~"
# jump_to_media_library
#
#def_key "E"
# jump_to_tag_editor
#
#def_key "U"
# toggle_playing_song_centering
#
#def_key "P"
# toggle_display_mode
#
#def_key "\\"
# toggle_interface
#
#def_key "!"
# toggle_separators_between_albums
#
#def_key "L"
# toggle_lyrics_fetcher
#
#def_key "F"
# fetch_lyrics_in_background
#
#def_key "alt-l"
# toggle_fetching_lyrics_in_background
#
#def_key "ctrl-l"
# toggle_screen_lock
#
#def_key "`"
# toggle_library_tag_type
#
#def_key "`"
# refetch_lyrics
#
#def_key "`"
# add_random_items
#
#def_key "ctrl-p"
# set_selected_items_priority
#
#def_key "q"
# quit
#

544
config Normal file
View File

@ -0,0 +1,544 @@
##############################################################################
## This is the example configuration file. Copy it to $HOME/.ncmpcpp/config ##
## or $XDG_CONFIG_HOME/ncmpcpp/config and set up your preferences. ##
##############################################################################
#
##### directories ######
##
## Directory for storing ncmpcpp related files. Changing it is useful if you
## want to store everything somewhere else and provide command line setting for
## alternative location to config file which defines that while launching
## ncmpcpp.
##
#
#ncmpcpp_directory = ~/.ncmpcpp
#
##
## Directory for storing downloaded lyrics. It defaults to ~/.lyrics since other
## MPD clients (eg. ncmpc) also use that location.
##
#
#lyrics_directory = ~/.lyrics
#
##### connection settings #####
#
#mpd_host = localhost
#
#mpd_port = 6600
#
#mpd_connection_timeout = 5
#
## Needed for tag editor and file operations to work.
##
#mpd_music_dir = ~/music
#
#mpd_crossfade_time = 5
#
##### music visualizer #####
##
## Note: In order to make music visualizer work you'll need to use mpd fifo
## output, whose format parameter has to be set to 44100:16:1 for mono
## visualization or 44100:16:2 for stereo visualization. Example configuration
## (it has to be put into mpd.conf):
##
## audio_output {
## type "fifo"
## name "Visualizer feed"
## path "/tmp/mpd.fifo"
## format "44100:16:2"
## }
##
#
#visualizer_fifo_path = /tmp/mpd.fifo
#
##
## Note: Below parameter is needed for ncmpcpp to determine which output
## provides data for visualizer and thus allow syncing between visualization and
## sound as currently there are some problems with it.
##
#
#visualizer_output_name = Visualizer feed
#
##
## If you set format to 44100:16:2, make it 'yes'.
##
#visualizer_in_stereo = yes
#
##
## Note: Below parameter defines how often ncmpcpp has to "synchronize"
## visualizer and audio outputs. 30 seconds is optimal value, but if you
## experience synchronization problems, set it to lower value. Keep in mind
## that sane values start with >=10.
##
#
#visualizer_sync_interval = 30
#
##
## Note: To enable spectrum frequency visualization you need to compile ncmpcpp
## with fftw3 support.
##
#
## Available values: spectrum, wave, wave_filled, ellipse.
##
#visualizer_type = wave
#
#visualizer_look = ●▮
#
#visualizer_color = blue, cyan, green, yellow, magenta, red
#
## Alternative subset of 256 colors for terminals that support it.
##
#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
#
##### system encoding #####
##
## ncmpcpp should detect your charset encoding but if it failed to do so, you
## can specify charset encoding you are using here.
##
## Note: You can see whether your ncmpcpp build supports charset detection by
## checking output of `ncmpcpp --version`.
##
## Note: Since MPD uses UTF-8 by default, setting this option makes sense only
## if your encoding is different.
##
#
#system_encoding = ""
#
##### delays #####
#
## Time of inactivity (in seconds) after playlist highlighting will be disabled
## (0 = always on).
##
#playlist_disable_highlight_delay = 5
#
## Defines how long messages are supposed to be visible.
##
#message_delay_time = 5
#
##### song format #####
##
## For a song format you can use:
##
## %l - length
## %f - filename
## %D - directory
## %a - artist
## %A - album artist
## %t - title
## %b - album
## %y - date
## %n - track number (01/12 -> 01)
## %N - full track info (01/12 -> 01/12)
## %g - genre
## %c - composer
## %p - performer
## %d - disc
## %C - comment
## %P - priority
## $R - begin right alignment
##
## If you want to make sure that a part of the format is displayed only when
## certain tags are present, you can archieve it by grouping them with brackets,
## e.g. '{%a - %t}' will be evaluated to 'ARTIST - TITLE' if both tags are
## present or '' otherwise. It is also possible to define a list of
## alternatives by providing several groups and separating them with '|',
## e.g. '{%t}|{%f}' will be evaluated to 'TITLE' or 'FILENAME' if the former is
## not present.
##
## Note: If you want to set limit on maximal length of a tag, just put the
## appropriate number between % and character that defines tag type, e.g. to
## make album take max. 20 terminal cells, use '%20b'.
##
## In addition, formats support markers used for text attributes. They are
## followed by character '$'. After that you can put:
##
## - 0 - default window color (discards all other colors)
## - 1 - black
## - 2 - red
## - 3 - green
## - 4 - yellow
## - 5 - blue
## - 6 - magenta
## - 7 - cyan
## - 8 - white
## - 9 - end of current color
## - b - bold text
## - u - underline text
## - r - reverse colors
## - a - use alternative character set
##
## If you don't want to use a non-color attribute anymore, just put it again,
## but this time insert character '/' between '$' and attribute character,
## e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename with
## reversed colors.
##
## If you want to use 256 colors and/or background colors in formats (the naming
## scheme is described below in section about color definitions), it can be done
## with the syntax $(COLOR), e.g. to set the artist tag to one of the
## non-standard colors and make it have yellow background, you need to write
## $(197_yellow)%a$(end). Note that for standard colors this is interchangable
## with attributes listed above.
##
## Note: colors can be nested.
##
#
#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
#
#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
#
#song_library_format = {%n - }{%t}|{%f}
#
#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
#
#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
#
#current_item_prefix = $(yellow)$r
#
#current_item_suffix = $/r$(end)
#
#current_item_inactive_column_prefix = $(white)$r
#
#current_item_inactive_column_suffix = $/r$(end)
#
#now_playing_prefix = $b
#
#now_playing_suffix = $/b
#
#browser_playlist_prefix = "$2playlist$9 "
#
#selected_item_prefix = $6
#
#selected_item_suffix = $9
#
#modified_item_prefix = $3> $9
#
##
## Note: attributes are not supported for the following variables.
##
#song_window_title_format = {%a - }{%t}|{%f}
##
## Note: Below variables are used for sorting songs in browser. The sort mode
## determines how songs are sorted, and can be used in combination with a sort
## format to specify a custom sorting format. Available values for
## browser_sort_mode are "name", "mtime", "format" and "noop".
##
#
#browser_sort_mode = name
#
#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
#
##### columns settings #####
##
## syntax of song columns list format is "column column etc."
##
## - syntax for each column is:
##
## (width of the column)[color of the column]{displayed tag}
##
## Note: Width is by default in %, if you want a column to have fixed size, add
## 'f' after the value, e.g. (10)[white]{a} will be the column that take 10% of
## screen (so the real width will depend on actual screen size), whereas
## (10f)[white]{a} will take 10 terminal cells, no matter how wide the screen
## is.
##
## - color is optional (if you want the default one, leave the field empty).
##
## Note: You can give a column additional attributes by putting appropriate
## character after displayed tag character. Available attributes are:
##
## - r - column will be right aligned
## - E - if tag is empty, empty tag marker won't be displayed
##
## You can also:
##
## - give a column custom name by putting it after attributes, separated with
## character ':', e.g. {lr:Length} gives you right aligned column of lengths
## named "Length".
##
## - define sequence of tags, that have to be displayed in case predecessor is
## empty in a way similar to the one in classic song format, i.e. using '|'
## character, e.g. {a|c|p:Owner} creates column named "Owner" that tries to
## display artist tag and then composer and performer if previous ones are not
## available.
##
#
#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
#
##### various settings #####
#
##
## Note: Custom command that will be executed each time song changes. Useful for
## notifications etc.
##
#execute_on_song_change = ""
#
##
## Note: Custom command that will be executed each time player state
## changes. The environment variable MPD_PLAYER_STATE is set to the current
## state (either unknown, play, pause, or stop) for its duration.
##
#
#execute_on_player_state_change = ""
#
#playlist_show_mpd_host = no
#
#playlist_show_remaining_time = no
#
#playlist_shorten_total_times = no
#
#playlist_separate_albums = no
#
##
## Note: Possible display modes: classic, columns.
##
#playlist_display_mode = columns
#
#browser_display_mode = classic
#
#search_engine_display_mode = classic
#
#playlist_editor_display_mode = classic
#
#discard_colors_if_item_is_selected = yes
#
#show_duplicate_tags = yes
#
#incremental_seeking = yes
#
#seek_time = 1
#
#volume_change_step = 2
#
#autocenter_mode = no
#
#centered_cursor = no
#
##
## Note: You can specify third character which will be used to build 'empty'
## part of progressbar.
##
#progressbar_look = =>
#
## Available values: database, playlist.
##
#default_place_to_search_in = database
#
## Available values: classic, alternative.
##
#user_interface = classic
#
#data_fetching_delay = yes
#
## Available values: artist, album_artist, date, genre, composer, performer.
##
#media_library_primary_tag = artist
#
#media_library_albums_split_by_date = yes
#
## Available values: wrapped, normal.
##
#default_find_mode = wrapped
#
#default_tag_editor_pattern = %n - %t
#
#header_visibility = yes
#
#statusbar_visibility = yes
#
#titles_visibility = yes
#
#header_text_scrolling = yes
#
#cyclic_scrolling = no
#
#lines_scrolled = 2
#
#lyrics_fetchers = lyricwiki, azlyrics, genius, sing365, lyricsmania, metrolyrics, justsomelyrics, jahlyrics, plyrics, tekstowo, internet
#
#follow_now_playing_lyrics = no
#
#fetch_lyrics_for_current_song_in_background = no
#
#store_lyrics_in_song_dir = no
#
#generate_win32_compatible_filenames = yes
#
#allow_for_physical_item_deletion = no
#
##
## Note: If you set this variable, ncmpcpp will try to get info from last.fm in
## language you set and if it fails, it will fall back to english. Otherwise it
## will use english the first time.
##
## Note: Language has to be expressed as an ISO 639 alpha-2 code.
##
#lastfm_preferred_language = en
#
#space_add_mode = add_remove
#
#show_hidden_files_in_local_browser = no
#
##
## How shall screen switcher work?
##
## - "previous" - switch between the current and previous screen.
## - "screen1,...,screenN" - switch between given sequence of screens.
##
## Screens available for use: help, playlist, browser, search_engine,
## media_library, playlist_editor, tag_editor, outputs, visualizer, clock,
## lyrics, last_fm.
##
#screen_switcher_mode = playlist, browser
#
##
## Note: You can define startup screen by choosing screen from the list above.
##
#startup_screen = playlist
#
##
## Note: You can define startup slave screen by choosing screen from the list
## above or an empty value for no slave screen.
##
#startup_slave_screen = ""
#
#startup_slave_screen_focus = no
#
##
## Default width of locked screen (in %). Acceptable values are from 20 to 80.
##
#
#locked_screen_width_part = 50
#
#ask_for_locked_screen_width_part = yes
#
#jump_to_now_playing_song_at_start = yes
#
#ask_before_clearing_playlists = yes
#
#clock_display_seconds = no
#
#display_volume_level = yes
#
#display_bitrate = no
#
#display_remaining_time = no
#
## Available values: none, basic, extended, perl.
##
#regular_expressions = perl
#
##
## Note: if below is enabled, ncmpcpp will ignore leading "The" word while
## sorting items in browser, tags in media library, etc.
##
#ignore_leading_the = no
#
##
## Note: if below is enabled, ncmpcpp will ignore diacritics while searching and
## filtering lists. This takes an effect only if boost was compiled with ICU
## support.
##
#ignore_diacritics = no
#
#block_search_constraints_change_if_items_found = yes
#
#mouse_support = yes
#
#mouse_list_scroll_whole_page = yes
#
#empty_tag_marker = <empty>
#
#tags_separator = " | "
#
#tag_editor_extended_numeration = no
#
#media_library_sort_by_mtime = no
#
#enable_window_title = yes
#
##
## Note: You can choose default search mode for search engine. Available modes
## are:
##
## - 1 - use mpd built-in searching (no regexes, pattern matching)
##
## - 2 - use ncmpcpp searching (pattern matching with support for regexes, but
## if your mpd is on a remote machine, downloading big database to process
## it can take a while
##
## - 3 - match only exact values (this mode uses mpd function for searching in
## database and local one for searching in current playlist)
##
#
#search_engine_default_search_mode = 1
#
#external_editor = nano
#
## Note: set to yes if external editor is a console application.
##
#use_console_editor = yes
#
##### colors definitions #####
##
## It is possible to set a background color by setting a color value
## "<foreground>_<background>", e.g. red_black will set foregound color to red
## and background color to black.
##
## In addition, for terminals that support 256 colors it is possible to set one
## of them by using a number in range [1, 256] instead of color name,
## e.g. numerical value corresponding to red_black is 2_1. To find out if the
## terminal supports 256 colors, run ncmpcpp and check out the bottom of the
## help screen for list of available colors and their numerical values.
##
## What is more, there are two special values for the background color:
## "transparent" and "current". The first one explicitly sets the background to
## be transparent, while the second one allows you to preserve current
## background color and change only the foreground one. It's used implicitly
## when background color is not specified.
##
## Moreover, it is possible to attach format information to selected color
## variables by appending to their end a colon followed by one or more format
## flags, e.g. black:b or red:ur. The following variables support this syntax:
## visualizer_color, color1, color2, empty_tag_color, volume_color,
## state_line_color, state_flags_color, progressbar_color,
## progressbar_elapsed_color, player_state_color, statusbar_time_color,
## alternative_ui_separator_color.
##
## Note: due to technical limitations of older ncurses version, if 256 colors
## are used there is a possibility that you'll be able to use only colors with
## transparent background.
#
#colors_enabled = yes
#
#empty_tag_color = cyan
#
#header_window_color = default
#
#volume_color = default
#
#state_line_color = default
#
#state_flags_color = default:b
#
#main_window_color = yellow
#
#color1 = white
#
#color2 = green
#
#progressbar_color = black:b
#
#progressbar_elapsed_color = green:b
#
#statusbar_color = default
#
#statusbar_time_color = default:b
#
#player_state_color = default:b
#
#alternative_ui_separator_color = black:b
#
#window_border_color = green
#
#active_window_border = red
#