barrier/tool/win/cmake/doc/cmake-2.8/cmake-properties.txt

1526 lines
67 KiB
Plaintext
Raw Normal View History

cmake version 2.8.0
------------------------------------------------------------------------------
Introduction
cmake-properties - Reference of CMake properties.
------------------------------------------------------------------------------
Properties
CMake Properties - Properties supported by CMake, the Cross-Platform Makefile Generator.
This is the documentation for the properties supported by CMake. Properties
can have different scopes. They can either be assigned to a source file, a
directory, a target or globally to CMake. By modifying the values of
properties the behaviour of the build system can be customized.
------------------------------------------------------------------------------
Properties of Global Scope
ALLOW_DUPLICATE_CUSTOM_TARGETS
Allow duplicate custom targets to be created.
Normally CMake requires that all targets built in a project have
globally unique logical names (see policy CMP0002). This is necessary
to generate meaningful project file names in Xcode and VS IDE
generators. It also allows the target names to be referenced
unambiguously.
Makefile generators are capable of supporting duplicate custom target
names. For projects that care only about Makefile generators and do
not wish to support Xcode or VS IDE generators, one may set this
property to true to allow duplicate custom targets. The property
allows multiple add_custom_target command calls in different
directories to specify the same target name. However, setting this
property will cause non-Makefile generators to produce an error and
refuse to generate the project.
DEBUG_CONFIGURATIONS
Specify which configurations are for debugging.
The value must be a semi-colon separated list of configuration names.
Currently this property is used only by the target_link_libraries
command (see its documentation for details). Additional uses may be
defined in the future.
This property must be set at the top level of the project and before
the first target_link_libraries command invocation. If any entry in
the list does not match a valid configuration for the project the
behavior is undefined.
DISABLED_FEATURES
List of features which are disabled during the CMake run.
List of features which are disabled during the CMake run. Be default
it contains the names of all packages which were not found. This is
determined using the <NAME>_FOUND variables. Packages which are
searched QUIET are not listed. A project can add its own features to
this list.This property is used by the macros in FeatureSummary.cmake.
ENABLED_FEATURES
List of features which are enabled during the CMake run.
List of features which are enabled during the CMake run. Be default
it contains the names of all packages which were found. This is
determined using the <NAME>_FOUND variables. Packages which are
searched QUIET are not listed. A project can add its own features to
this list.This property is used by the macros in FeatureSummary.cmake.
ENABLED_LANGUAGES
Read-only property that contains the list of currently enabled
languages
Set to list of currently enabled languages.
FIND_LIBRARY_USE_LIB64_PATHS
Whether FIND_LIBRARY should automatically search lib64 directories.
FIND_LIBRARY_USE_LIB64_PATHS is a boolean specifying whether the
FIND_LIBRARY command should automatically search the lib64 variant of
directories called lib in the search path when building 64-bit
binaries.
FIND_LIBRARY_USE_OPENBSD_VERSIONING
Whether FIND_LIBRARY should find OpenBSD-style shared libraries.
This property is a boolean specifying whether the FIND_LIBRARY command
should find shared libraries with OpenBSD-style versioned extension:
".so.<major>.<minor>". The property is set to true on OpenBSD and
false on other platforms.
GLOBAL_DEPENDS_DEBUG_MODE
Enable global target dependency graph debug mode.
CMake automatically analyzes the global inter-target dependency graph
at the beginning of native build system generation. This property
causes it to display details of its analysis to stderr.
GLOBAL_DEPENDS_NO_CYCLES
Disallow global target dependency graph cycles.
CMake automatically analyzes the global inter-target dependency graph
at the beginning of native build system generation. It reports an
error if the dependency graph contains a cycle that does not consist
of all STATIC library targets. This property tells CMake to disallow
all cycles completely, even among static libraries.
IN_TRY_COMPILE
Read-only property that is true during a try-compile configuration.
True when building a project inside a TRY_COMPILE or TRY_RUN command.
PACKAGES_FOUND
List of packages which were found during the CMake run.
List of packages which were found during the CMake run. Whether a
package has been found is determined using the <NAME>_FOUND variables.
PACKAGES_NOT_FOUND
List of packages which were not found during the CMake run.
List of packages which were not found during the CMake run. Whether a
package has been found is determined using the <NAME>_FOUND variables.
REPORT_UNDEFINED_PROPERTIES
If set, report any undefined properties to this file.
If this property is set to a filename then when CMake runs it will
report any properties or variables that were accessed but not defined
into the filename specified in this property.
RULE_LAUNCH_COMPILE
Specify a launcher for compile rules.
Makefile generators prefix compiler commands with the given launcher
command line. This is intended to allow launchers to intercept build
problems with high granularity. Non-Makefile generators currently
ignore this property.
RULE_LAUNCH_CUSTOM
Specify a launcher for custom rules.
Makefile generators prefix custom commands with the given launcher
command line. This is intended to allow launchers to intercept build
problems with high granularity. Non-Makefile generators currently
ignore this property.
RULE_LAUNCH_LINK
Specify a launcher for link rules.
Makefile generators prefix link and archive commands with the given
launcher command line. This is intended to allow launchers to
intercept build problems with high granularity. Non-Makefile
generators currently ignore this property.
RULE_MESSAGES
Specify whether to report a message for each make rule.
This property specifies whether Makefile generators should add a
progress message describing what each build rule does. If the
property is not set the default is ON. Set the property to OFF to
disable granular messages and report only as each target completes.
This is intended to allow scripted builds to avoid the build time cost
of detailed reports. If a CMAKE_RULE_MESSAGES cache entry exists its
value initializes the value of this property. Non-Makefile generators
currently ignore this property.
TARGET_ARCHIVES_MAY_BE_SHARED_LIBS
Set if shared libraries may be named like archives.
On AIX shared libraries may be named "lib<name>.a". This property is
set to true on such platforms.
TARGET_SUPPORTS_SHARED_LIBS
Does the target platform support shared libraries.
TARGET_SUPPORTS_SHARED_LIBS is a boolean specifying whether the target
platform supports shared libraries. Basically all current general
general purpose OS do so, the exception are usually embedded systems
with no or special OSs.
__CMAKE_DELETE_CACHE_CHANGE_VARS_
Internal property
Used to detect compiler changes, Do not set.
------------------------------------------------------------------------------
Properties on Directories
ADDITIONAL_MAKE_CLEAN_FILES
Additional files to clean during the make clean stage.
A list of files that will be cleaned as a part of the "make clean"
stage.
CACHE_VARIABLES
List of cache variables available in the current directory.
This read-only property specifies the list of CMake cache variables
currently defined. It is intended for debugging purposes.
CLEAN_NO_CUSTOM
Should the output of custom commands be left.
If this is true then the outputs of custom commands for this directory
will not be removed during the "make clean" stage.
COMPILE_DEFINITIONS
Preprocessor definitions for compiling a directory's sources.
The COMPILE_DEFINITIONS property may be set to a semicolon-separated
list of preprocessor definitions using the syntax VAR or VAR=value.
Function-style definitions are not supported. CMake will
automatically escape the value correctly for the native build system
(note that CMake language syntax may require escapes to specify some
values). This property may be set on a per-configuration basis using
the name COMPILE_DEFINITIONS_<CONFIG> where <CONFIG> is an upper-case
name (ex. "COMPILE_DEFINITIONS_DEBUG"). This property will be
initialized in each directory by its value in the directory's parent.
CMake will automatically drop some definitions that are not supported
by the native build tool. The VS6 IDE does not support definition
values with spaces (but NMake does).
Dislaimer: Most native build tools have poor support for escaping
certain values. CMake has work-arounds for many cases but some values
may just not be possible to pass correctly. If a value does not seem
to be escaped correctly, do not attempt to work-around the problem by
adding escape sequences to the value. Your work-around may break in a
future version of CMake that has improved escape support. Instead
consider defining the macro in a (configured) header file. Then
report the limitation.
COMPILE_DEFINITIONS_<CONFIG>
Per-configuration preprocessor definitions in a directory.
This is the configuration-specific version of COMPILE_DEFINITIONS.
This property will be initialized in each directory by its value in
the directory's parent.
DEFINITIONS
For CMake 2.4 compatibility only. Use COMPILE_DEFINITIONS instead.
This read-only property specifies the list of flags given so far to
the add_definitions command. It is intended for debugging purposes.
Use the COMPILE_DEFINITIONS instead.
EXCLUDE_FROM_ALL
Exclude the directory from the all target of its parent.
A property on a directory that indicates if its targets are excluded
from the default build target. If it is not, then with a Makefile for
example typing make will cause the targets to be built. The same
concept applies to the default build of other generators.
IMPLICIT_DEPENDS_INCLUDE_TRANSFORM
Specify #include line transforms for dependencies in a directory.
This property specifies rules to transform macro-like #include lines
during implicit dependency scanning of C and C++ source files. The
list of rules must be semicolon-separated with each entry of the form
"A_MACRO(%)=value-with-%" (the % must be literal). During dependency
scanning occurrences of A_MACRO(...) on #include lines will be
replaced by the value given with the macro argument substituted for
'%'. For example, the entry
MYDIR(%)=<mydir/%>
will convert lines of the form
#include MYDIR(myheader.h)
to
#include <mydir/myheader.h>
allowing the dependency to be followed.
This property applies to sources in all targets within a directory.
The property value is initialized in each directory by its value in
the directory's parent.
INCLUDE_DIRECTORIES
List of preprocessor include file search directories.
This read-only property specifies the list of directories given so far
to the include_directories command. It is intended for debugging
purposes.
INCLUDE_REGULAR_EXPRESSION
Include file scanning regular expression.
This read-only property specifies the regular expression used during
dependency scanning to match include files that should be followed.
See the include_regular_expression command.
INTERPROCEDURAL_OPTIMIZATION
Enable interprocedural optimization for targets in a directory.
If set to true, enables interprocedural optimizations if they are
known to be supported by the compiler.
INTERPROCEDURAL_OPTIMIZATION_<CONFIG>
Per-configuration interprocedural optimization for a directory.
This is a per-configuration version of INTERPROCEDURAL_OPTIMIZATION.
If set, this property overrides the generic property for the named
configuration.
LINK_DIRECTORIES
List of linker search directories.
This read-only property specifies the list of directories given so far
to the link_directories command. It is intended for debugging
purposes.
LISTFILE_STACK
The current stack of listfiles being processed.
This property is mainly useful when trying to debug errors in your
CMake scripts. It returns a list of what list files are currently
being processed, in order. So if one listfile does an INCLUDE command
then that is effectively pushing the included listfile onto the stack.
MACROS
List of macro commands available in the current directory.
This read-only property specifies the list of CMake macros currently
defined. It is intended for debugging purposes. See the macro
command.
PARENT_DIRECTORY
Source directory that added current subdirectory.
This read-only property specifies the source directory that added the
current source directory as a subdirectory of the build. In the
top-level directory the value is the empty-string.
RULE_LAUNCH_COMPILE
Specify a launcher for compile rules.
See the global property of the same name for details. This overrides
the global property for a directory.
RULE_LAUNCH_CUSTOM
Specify a launcher for custom rules.
See the global property of the same name for details. This overrides
the global property for a directory.
RULE_LAUNCH_LINK
Specify a launcher for link rules.
See the global property of the same name for details. This overrides
the global property for a directory.
TEST_INCLUDE_FILE
A cmake file that will be included when ctest is run.
If you specify TEST_INCLUDE_FILE, that file will be included and
processed when ctest is run on the directory.
VARIABLES
List of variables defined in the current directory.
This read-only property specifies the list of CMake variables
currently defined. It is intended for debugging purposes.
------------------------------------------------------------------------------
Properties on Targets
<CONFIG>_OUTPUT_NAME
Old per-configuration target file base name.
This is a configuration-specific version of OUTPUT_NAME. Use
OUTPUT_NAME_<CONFIG> instead.
<CONFIG>_POSTFIX
Postfix to append to the target file name for configuration <CONFIG>.
When building with configuration <CONFIG> the value of this property
is appended to the target file name built on disk. For non-executable
targets, this property is initialized by the value of the variable
CMAKE_<CONFIG>_POSTFIX if it is set when a target is created. This
property is ignored on the Mac for Frameworks and App Bundles.
ARCHIVE_OUTPUT_DIRECTORY
Output directory in which to build ARCHIVE target files.
This property specifies the directory into which archive target files
should be built. There are three kinds of target files that may be
built: archive, library, and runtime. Executables are always treated
as runtime targets. Static libraries are always treated as archive
targets. Module libraries are always treated as library targets. For
non-DLL platforms shared libraries are treated as library targets.
For DLL platforms the DLL part of a shared library is treated as a
runtime target and the corresponding import library is treated as an
archive target. All Windows-based systems including Cygwin are DLL
platforms. This property is initialized by the value of the variable
CMAKE_ARCHIVE_OUTPUT_DIRECTORY if it is set when a target is created.
ARCHIVE_OUTPUT_NAME
Output name for ARCHIVE target files.
This property specifies the base name for archive target files. It
overrides OUTPUT_NAME and OUTPUT_NAME_<CONFIG> properties. There are
three kinds of target files that may be built: archive, library, and
runtime. Executables are always treated as runtime targets. Static
libraries are always treated as archive targets. Module libraries are
always treated as library targets. For non-DLL platforms shared
libraries are treated as library targets. For DLL platforms the DLL
part of a shared library is treated as a runtime target and the
corresponding import library is treated as an archive target. All
Windows-based systems including Cygwin are DLL platforms.
ARCHIVE_OUTPUT_NAME_<CONFIG>
Per-configuration output name for ARCHIVE target files.
This is the configuration-specific version of ARCHIVE_OUTPUT_NAME.
BUILD_WITH_INSTALL_RPATH
Should build tree targets have install tree rpaths.
BUILD_WITH_INSTALL_RPATH is a boolean specifying whether to link the
target in the build tree with the INSTALL_RPATH. This takes
precedence over SKIP_BUILD_RPATH and avoids the need for relinking
before installation. This property is initialized by the value of the
variable CMAKE_BUILD_WITH_INSTALL_RPATH if it is set when a target is
created.
COMPILE_DEFINITIONS
Preprocessor definitions for compiling a target's sources.
The COMPILE_DEFINITIONS property may be set to a semicolon-separated
list of preprocessor definitions using the syntax VAR or VAR=value.
Function-style definitions are not supported. CMake will
automatically escape the value correctly for the native build system
(note that CMake language syntax may require escapes to specify some
values). This property may be set on a per-configuration basis using
the name COMPILE_DEFINITIONS_<CONFIG> where <CONFIG> is an upper-case
name (ex. "COMPILE_DEFINITIONS_DEBUG").
CMake will automatically drop some definitions that are not supported
by the native build tool. The VS6 IDE does not support definition
values with spaces (but NMake does).
Dislaimer: Most native build tools have poor support for escaping
certain values. CMake has work-arounds for many cases but some values
may just not be possible to pass correctly. If a value does not seem
to be escaped correctly, do not attempt to work-around the problem by
adding escape sequences to the value. Your work-around may break in a
future version of CMake that has improved escape support. Instead
consider defining the macro in a (configured) header file. Then
report the limitation.
COMPILE_DEFINITIONS_<CONFIG>
Per-configuration preprocessor definitions on a target.
This is the configuration-specific version of COMPILE_DEFINITIONS.
COMPILE_FLAGS
Additional flags to use when compiling this target's sources.
The COMPILE_FLAGS property sets additional compiler flags used to
build sources within the target. Use COMPILE_DEFINITIONS to pass
additional preprocessor definitions.
DEBUG_POSTFIX
See target property <CONFIG>_POSTFIX.
This property is a special case of the more-general <CONFIG>_POSTFIX
property for the DEBUG configuration.
DEFINE_SYMBOL
Define a symbol when compiling this target's sources.
DEFINE_SYMBOL sets the name of the preprocessor symbol defined when
compiling sources in a shared library. If not set here then it is set
to target_EXPORTS by default (with some substitutions if the target is
not a valid C identifier). This is useful for headers to know whether
they are being included from inside their library our outside to
properly setup dllexport/dllimport decorations.
ENABLE_EXPORTS
Specify whether an executable exports symbols for loadable modules.
Normally an executable does not export any symbols because it is the
final program. It is possible for an executable to export symbols to
be used by loadable modules. When this property is set to true CMake
will allow other targets to "link" to the executable with the
TARGET_LINK_LIBRARIES command. On all platforms a target-level
dependency on the executable is created for targets that link to it.
For non-DLL platforms the link rule is simply ignored since the
dynamic loader will automatically bind symbols when the module is
loaded. For DLL platforms an import library will be created for the
exported symbols and then used for linking. All Windows-based systems
including Cygwin are DLL platforms.
EXCLUDE_FROM_ALL
Exclude the target from the all target.
A property on a target that indicates if the target is excluded from
the default build target. If it is not, then with a Makefile for
example typing make will cause this target to be built. The same
concept applies to the default build of other generators. Installing
a target with EXCLUDE_FROM_ALL set to true has undefined behavior.
EchoString
A message to be displayed when the target is built.
A message to display on some generators (such as makefiles) when the
target is built.
FRAMEWORK
This target is a framework on the Mac.
If a shared library target has this property set to true it will be
built as a framework when built on the mac. It will have the
directory structure required for a framework and will be suitable to
be used with the -framework option
Fortran_MODULE_DIRECTORY
Specify output directory for Fortran modules provided by the target.
If the target contains Fortran source files that provide modules and
the compiler supports a module output directory this specifies the
directory in which the modules will be placed. When this property is
not set the modules will be placed in the build directory
corresponding to the target's source directory. If the variable
CMAKE_Fortran_MODULE_DIRECTORY is set when a target is created its
value is used to initialize this property.
GENERATOR_FILE_NAME
Generator's file for this target.
An internal property used by some generators to record the name of
project or dsp file associated with this target.
HAS_CXX
Link the target using the C++ linker tool (obselete).
This is equivalent to setting the LINKER_LANGUAGE property to CXX.
See that property's documentation for details.
IMPLICIT_DEPENDS_INCLUDE_TRANSFORM
Specify #include line transforms for dependencies in a target.
This property specifies rules to transform macro-like #include lines
during implicit dependency scanning of C and C++ source files. The
list of rules must be semicolon-separated with each entry of the form
"A_MACRO(%)=value-with-%" (the % must be literal). During dependency
scanning occurrences of A_MACRO(...) on #include lines will be
replaced by the value given with the macro argument substituted for
'%'. For example, the entry
MYDIR(%)=<mydir/%>
will convert lines of the form
#include MYDIR(myheader.h)
to
#include <mydir/myheader.h>
allowing the dependency to be followed.
This property applies to sources in the target on which it is set.
IMPORTED
Read-only indication of whether a target is IMPORTED.
The boolean value of this property is true for targets created with
the IMPORTED option to add_executable or add_library. It is false for
targets built within the project.
IMPORTED_CONFIGURATIONS
Configurations provided for an IMPORTED target.
Lists configuration names available for an IMPORTED target. The names
correspond to configurations defined in the project from which the
target is imported. If the importing project uses a different set of
configurations the names may be mapped using the
MAP_IMPORTED_CONFIG_<CONFIG> property. Ignored for non-imported
targets.
IMPORTED_IMPLIB
Full path to the import library for an IMPORTED target.
Specifies the location of the ".lib" part of a windows DLL. Ignored
for non-imported targets.
IMPORTED_IMPLIB_<CONFIG>
Per-configuration version of IMPORTED_IMPLIB property.
This property is used when loading settings for the <CONFIG>
configuration of an imported target. Configuration names correspond
to those provided by the project from which the target is imported.
IMPORTED_LINK_DEPENDENT_LIBRARIES
Dependent shared libraries of an imported shared library.
Shared libraries may be linked to other shared libraries as part of
their implementation. On some platforms the linker searches for the
dependent libraries of shared libraries they are including in the
link. This property lists the dependent shared libraries of an
imported library. The list should be disjoint from the list of
interface libraries in the IMPORTED_LINK_INTERFACE_LIBRARIES property.
On platforms requiring dependent shared libraries to be found at link
time CMake uses this list to add appropriate files or paths to the
link command line. Ignored for non-imported targets.
IMPORTED_LINK_DEPENDENT_LIBRARIES_<CONFIG>
Per-configuration version of IMPORTED_LINK_DEPENDENT_LIBRARIES.
This property is used when loading settings for the <CONFIG>
configuration of an imported target. Configuration names correspond
to those provided by the project from which the target is imported.
If set, this property completely overrides the generic property for
the named configuration.
IMPORTED_LINK_INTERFACE_LANGUAGES
Languages compiled into an IMPORTED static library.
Lists languages of soure files compiled to produce a STATIC IMPORTED
library (such as "C" or "CXX"). CMake accounts for these languages
when computing how to link a target to the imported library. For
example, when a C executable links to an imported C++ static library
CMake chooses the C++ linker to satisfy language runtime dependencies
of the static library.
This property is ignored for targets that are not STATIC libraries.
This property is ignored for non-imported targets.
IMPORTED_LINK_INTERFACE_LANGUAGES_<CONFIG>
Per-configuration version of IMPORTED_LINK_INTERFACE_LANGUAGES.
This property is used when loading settings for the <CONFIG>
configuration of an imported target. Configuration names correspond
to those provided by the project from which the target is imported.
If set, this property completely overrides the generic property for
the named configuration.
IMPORTED_LINK_INTERFACE_LIBRARIES
Transitive link interface of an IMPORTED target.
Lists libraries whose interface is included when an IMPORTED library
target is linked to another target. The libraries will be included on
the link line for the target. Unlike the LINK_INTERFACE_LIBRARIES
property, this property applies to all imported target types,
including STATIC libraries. This property is ignored for non-imported
targets.
IMPORTED_LINK_INTERFACE_LIBRARIES_<CONFIG>
Per-configuration version of IMPORTED_LINK_INTERFACE_LIBRARIES.
This property is used when loading settings for the <CONFIG>
configuration of an imported target. Configuration names correspond
to those provided by the project from which the target is imported.
If set, this property completely overrides the generic property for
the named configuration.
IMPORTED_LINK_INTERFACE_MULTIPLICITY
Repetition count for cycles of IMPORTED static libraries.
This is LINK_INTERFACE_MULTIPLICITY for IMPORTED targets.
IMPORTED_LINK_INTERFACE_MULTIPLICITY_<CONFIG>
Per-configuration repetition count for cycles of IMPORTED archives.
This is the configuration-specific version of
IMPORTED_LINK_INTERFACE_MULTIPLICITY. If set, this property
completely overrides the generic property for the named configuration.
IMPORTED_LOCATION
Full path to the main file on disk for an IMPORTED target.
Specifies the location of an IMPORTED target file on disk. For
executables this is the location of the executable file. For bundles
on OS X this is the location of the executable file inside
Contents/MacOS under the application bundle folder. For static
libraries and modules this is the location of the library or module.
For shared libraries on non-DLL platforms this is the location of the
shared library. For frameworks on OS X this is the location of the
library file symlink just inside the framework folder. For DLLs this
is the location of the ".dll" part of the library. For UNKNOWN
libraries this is the location of the file to be linked. Ignored for
non-imported targets.
IMPORTED_LOCATION_<CONFIG>
Per-configuration version of IMPORTED_LOCATION property.
This property is used when loading settings for the <CONFIG>
configuration of an imported target. Configuration names correspond
to those provided by the project from which the target is imported.
IMPORTED_SONAME
The "soname" of an IMPORTED target of shared library type.
Specifies the "soname" embedded in an imported shared library. This
is meaningful only on platforms supporting the feature. Ignored for
non-imported targets.
IMPORTED_SONAME_<CONFIG>
Per-configuration version of IMPORTED_SONAME property.
This property is used when loading settings for the <CONFIG>
configuration of an imported target. Configuration names correspond
to those provided by the project from which the target is imported.
IMPORT_PREFIX
What comes before the import library name.
Similar to the target property PREFIX, but used for import libraries
(typically corresponding to a DLL) instead of regular libraries. A
target property that can be set to override the prefix (such as "lib")
on an import library name.
IMPORT_SUFFIX
What comes after the import library name.
Similar to the target property SUFFIX, but used for import libraries
(typically corresponding to a DLL) instead of regular libraries. A
target property that can be set to override the suffix (such as
".lib") on an import library name.
INSTALL_NAME_DIR
Mac OSX directory name for installed targets.
INSTALL_NAME_DIR is a string specifying the directory portion of the
"install_name" field of shared libraries on Mac OSX to use in the
installed targets.
INSTALL_RPATH
The rpath to use for installed targets.
A semicolon-separated list specifying the rpath to use in installed
targets (for platforms that support it). This property is initialized
by the value of the variable CMAKE_INSTALL_RPATH if it is set when a
target is created.
INSTALL_RPATH_USE_LINK_PATH
Add paths to linker search and installed rpath.
INSTALL_RPATH_USE_LINK_PATH is a boolean that if set to true will
append directories in the linker search path and outside the project
to the INSTALL_RPATH. This property is initialized by the value of
the variable CMAKE_INSTALL_RPATH_USE_LINK_PATH if it is set when a
target is created.
INTERPROCEDURAL_OPTIMIZATION
Enable interprocedural optimization for a target.
If set to true, enables interprocedural optimizations if they are
known to be supported by the compiler.
INTERPROCEDURAL_OPTIMIZATION_<CONFIG>
Per-configuration interprocedural optimization for a target.
This is a per-configuration version of INTERPROCEDURAL_OPTIMIZATION.
If set, this property overrides the generic property for the named
configuration.
LABELS
Specify a list of text labels associated with a target.
Target label semantics are currently unspecified.
LIBRARY_OUTPUT_DIRECTORY
Output directory in which to build LIBRARY target files.
This property specifies the directory into which library target files
should be built. There are three kinds of target files that may be
built: archive, library, and runtime. Executables are always treated
as runtime targets. Static libraries are always treated as archive
targets. Module libraries are always treated as library targets. For
non-DLL platforms shared libraries are treated as library targets.
For DLL platforms the DLL part of a shared library is treated as a
runtime target and the corresponding import library is treated as an
archive target. All Windows-based systems including Cygwin are DLL
platforms. This property is initialized by the value of the variable
CMAKE_LIBRARY_OUTPUT_DIRECTORY if it is set when a target is created.
LIBRARY_OUTPUT_NAME
Output name for LIBRARY target files.
This property specifies the base name for library target files. It
overrides OUTPUT_NAME and OUTPUT_NAME_<CONFIG> properties. There are
three kinds of target files that may be built: archive, library, and
runtime. Executables are always treated as runtime targets. Static
libraries are always treated as archive targets. Module libraries are
always treated as library targets. For non-DLL platforms shared
libraries are treated as library targets. For DLL platforms the DLL
part of a shared library is treated as a runtime target and the
corresponding import library is treated as an archive target. All
Windows-based systems including Cygwin are DLL platforms.
LIBRARY_OUTPUT_NAME_<CONFIG>
Per-configuration output name for LIBRARY target files.
This is the configuration-specific version of LIBRARY_OUTPUT_NAME.
LINKER_LANGUAGE
Specifies language whose compiler will invoke the linker.
For executables, shared libraries, and modules, this sets the language
whose compiler is used to link the target (such as "C" or "CXX"). A
typical value for an executable is the language of the source file
providing the program entry point (main). If not set, the language
with the highest linker preference value is the default. See
documentation of CMAKE_<LANG>_LINKER_PREFERENCE variables.
LINK_FLAGS
Additional flags to use when linking this target.
The LINK_FLAGS property can be used to add extra flags to the link
step of a target. LINK_FLAGS_<CONFIG> will add to the configuration
<CONFIG>, for example, DEBUG, RELEASE, MINSIZEREL, RELWITHDEBINFO.
LINK_FLAGS_<CONFIG>
Per-configuration linker flags for a target.
This is the configuration-specific version of LINK_FLAGS.
LINK_INTERFACE_LIBRARIES
List public interface libraries for a shared library or executable.
By default linking to a shared library target transitively links to
targets with which the library itself was linked. For an executable
with exports (see the ENABLE_EXPORTS property) no default transitive
link dependencies are used. This property replaces the default
transitive link dependencies with an explict list. When the target is
linked into another target the libraries listed (and recursively their
link interface libraries) will be provided to the other target also.
If the list is empty then no transitive link dependencies will be
incorporated when this target is linked into another target even if
the default set is non-empty. This property is ignored for STATIC
libraries.
LINK_INTERFACE_LIBRARIES_<CONFIG>
Per-configuration list of public interface libraries for a target.
This is the configuration-specific version of
LINK_INTERFACE_LIBRARIES. If set, this property completely overrides
the generic property for the named configuration.
LINK_INTERFACE_MULTIPLICITY
Repetition count for STATIC libraries with cyclic dependencies.
When linking to a STATIC library target with cyclic dependencies the
linker may need to scan more than once through the archives in the
strongly connected component of the dependency graph. CMake by
default constructs the link line so that the linker will scan through
the component at least twice. This property specifies the minimum
number of scans if it is larger than the default. CMake uses the
largest value specified by any target in a component.
LINK_INTERFACE_MULTIPLICITY_<CONFIG>
Per-configuration repetition count for cycles of STATIC libraries.
This is the configuration-specific version of
LINK_INTERFACE_MULTIPLICITY. If set, this property completely
overrides the generic property for the named configuration.
LINK_SEARCH_END_STATIC
End a link line such that static system libraries are used.
Some linkers support switches such as -Bstatic and -Bdynamic to
determine whether to use static or shared libraries for -lXXX options.
CMake uses these options to set the link type for libraries whose full
paths are not known or (in some cases) are in implicit link
directories for the platform. By default the linker search type is
left at -Bdynamic by the end of the library list. This property
switches the final linker search type to -Bstatic.
LOCATION
Read-only location of a target on disk.
For an imported target, this read-only property returns the value of
the LOCATION_<CONFIG> property for an unspecified configuration
<CONFIG> provided by the target.
For a non-imported target, this property is provided for compatibility
with CMake 2.4 and below. It was meant to get the location of an
executable target's output file for use in add_custom_command. The
path may contain a build-system-specific portion that is replaced at
build time with the configuration getting built (such as
"$(ConfigurationName)" in VS). In CMake 2.6 and above
add_custom_command automatically recognizes a target name in its
COMMAND and DEPENDS options and computes the target location.
Therefore this property is not needed for creating custom commands.
LOCATION_<CONFIG>
Read-only property providing a target location on disk.
A read-only property that indicates where a target's main file is
located on disk for the configuration <CONFIG>. The property is
defined only for library and executable targets. An imported target
may provide a set of configurations different from that of the
importing project. By default CMake looks for an exact-match but
otherwise uses an arbitrary available configuration. Use the
MAP_IMPORTED_CONFIG_<CONFIG> property to map imported configurations
explicitly.
MACOSX_BUNDLE
Build an executable as an application bundle on Mac OS X.
When this property is set to true the executable when built on Mac OS
X will be created as an application bundle. This makes it a GUI
executable that can be launched from the Finder. See the
MACOSX_BUNDLE_INFO_PLIST target property for information about
creation of the Info.plist file for the application bundle.
MACOSX_BUNDLE_INFO_PLIST
Specify a custom Info.plist template for a Mac OS X App Bundle.
An executable target with MACOSX_BUNDLE enabled will be built as an
application bundle on Mac OS X. By default its Info.plist file is
created by configuring a template called MacOSXBundleInfo.plist.in
located in the CMAKE_MODULE_PATH. This property specifies an
alternative template file name which may be a full path.
The following target properties may be set to specify content to be
configured into the file:
MACOSX_BUNDLE_INFO_STRING
MACOSX_BUNDLE_ICON_FILE
MACOSX_BUNDLE_GUI_IDENTIFIER
MACOSX_BUNDLE_LONG_VERSION_STRING
MACOSX_BUNDLE_BUNDLE_NAME
MACOSX_BUNDLE_SHORT_VERSION_STRING
MACOSX_BUNDLE_BUNDLE_VERSION
MACOSX_BUNDLE_COPYRIGHT
CMake variables of the same name may be set to affect all targets in a
directory that do not have each specific property set. If a custom
Info.plist is specified by this property it may of course hard-code
all the settings instead of using the target properties.
MACOSX_FRAMEWORK_INFO_PLIST
Specify a custom Info.plist template for a Mac OS X Framework.
An library target with FRAMEWORK enabled will be built as a framework
on Mac OS X. By default its Info.plist file is created by configuring
a template called MacOSXFrameworkInfo.plist.in located in the
CMAKE_MODULE_PATH. This property specifies an alternative template
file name which may be a full path.
The following target properties may be set to specify content to be
configured into the file:
MACOSX_FRAMEWORK_ICON_FILE
MACOSX_FRAMEWORK_IDENTIFIER
MACOSX_FRAMEWORK_SHORT_VERSION_STRING
MACOSX_FRAMEWORK_BUNDLE_VERSION
CMake variables of the same name may be set to affect all targets in a
directory that do not have each specific property set. If a custom
Info.plist is specified by this property it may of course hard-code
all the settings instead of using the target properties.
MAP_IMPORTED_CONFIG_<CONFIG>
Map from project configuration to IMPORTED target's configuration.
List configurations of an imported target that may be used for the
current project's <CONFIG> configuration. Targets imported from
another project may not provide the same set of configuration names
available in the current project. Setting this property tells CMake
what imported configurations are suitable for use when building the
<CONFIG> configuration. The first configuration in the list found to
be provided by the imported target is selected. If no matching
configurations are available the imported target is considered to be
not found. This property is ignored for non-imported targets.
OUTPUT_NAME
Output name for target files.
This sets the base name for output files created for an executable or
library target. If not set, the logical target name is used by
default.
OUTPUT_NAME_<CONFIG>
Per-configuration target file base name.
This is the configuration-specific version of OUTPUT_NAME.
POST_INSTALL_SCRIPT
Deprecated install support.
The PRE_INSTALL_SCRIPT and POST_INSTALL_SCRIPT properties are the old
way to specify CMake scripts to run before and after installing a
target. They are used only when the old INSTALL_TARGETS command is
used to install the target. Use the INSTALL command instead.
PREFIX
What comes before the library name.
A target property that can be set to override the prefix (such as
"lib") on a library name.
PRE_INSTALL_SCRIPT
Deprecated install support.
The PRE_INSTALL_SCRIPT and POST_INSTALL_SCRIPT properties are the old
way to specify CMake scripts to run before and after installing a
target. They are used only when the old INSTALL_TARGETS command is
used to install the target. Use the INSTALL command instead.
PRIVATE_HEADER
Specify private header files in a FRAMEWORK shared library target.
Shared library targets marked with the FRAMEWORK property generate
frameworks on OS X and normal shared libraries on other platforms.
This property may be set to a list of header files to be placed in the
PrivateHeaders directory inside the framework folder. On non-Apple
platforms these headers may be installed using the PRIVATE_HEADER
option to the install(TARGETS) command.
PROJECT_LABEL
Change the name of a target in an IDE.
Can be used to change the name of the target in an IDE like visual
stuido.
PUBLIC_HEADER
Specify public header files in a FRAMEWORK shared library target.
Shared library targets marked with the FRAMEWORK property generate
frameworks on OS X and normal shared libraries on other platforms.
This property may be set to a list of header files to be placed in the
Headers directory inside the framework folder. On non-Apple platforms
these headers may be installed using the PUBLIC_HEADER option to the
install(TARGETS) command.
RESOURCE
Specify resource files in a FRAMEWORK shared library target.
Shared library targets marked with the FRAMEWORK property generate
frameworks on OS X and normal shared libraries on other platforms.
This property may be set to a list of files to be placed in the
Resources directory inside the framework folder. On non-Apple
platforms these files may be installed using the RESOURCE option to
the install(TARGETS) command.
RULE_LAUNCH_COMPILE
Specify a launcher for compile rules.
See the global property of the same name for details. This overrides
the global and directory property for a target.
RULE_LAUNCH_CUSTOM
Specify a launcher for custom rules.
See the global property of the same name for details. This overrides
the global and directory property for a target.
RULE_LAUNCH_LINK
Specify a launcher for link rules.
See the global property of the same name for details. This overrides
the global and directory property for a target.
RUNTIME_OUTPUT_DIRECTORY
Output directory in which to build RUNTIME target files.
This property specifies the directory into which runtime target files
should be built. There are three kinds of target files that may be
built: archive, library, and runtime. Executables are always treated
as runtime targets. Static libraries are always treated as archive
targets. Module libraries are always treated as library targets. For
non-DLL platforms shared libraries are treated as library targets.
For DLL platforms the DLL part of a shared library is treated as a
runtime target and the corresponding import library is treated as an
archive target. All Windows-based systems including Cygwin are DLL
platforms. This property is initialized by the value of the variable
CMAKE_RUNTIME_OUTPUT_DIRECTORY if it is set when a target is created.
RUNTIME_OUTPUT_NAME
Output name for RUNTIME target files.
This property specifies the base name for runtime target files. It
overrides OUTPUT_NAME and OUTPUT_NAME_<CONFIG> properties. There are
three kinds of target files that may be built: archive, library, and
runtime. Executables are always treated as runtime targets. Static
libraries are always treated as archive targets. Module libraries are
always treated as library targets. For non-DLL platforms shared
libraries are treated as library targets. For DLL platforms the DLL
part of a shared library is treated as a runtime target and the
corresponding import library is treated as an archive target. All
Windows-based systems including Cygwin are DLL platforms.
RUNTIME_OUTPUT_NAME_<CONFIG>
Per-configuration output name for RUNTIME target files.
This is the configuration-specific version of RUNTIME_OUTPUT_NAME.
SKIP_BUILD_RPATH
Should rpaths be used for the build tree.
SKIP_BUILD_RPATH is a boolean specifying whether to skip automatic
generation of an rpath allowing the target to run from the build tree.
This property is initialized by the value of the variable
CMAKE_SKIP_BUILD_RPATH if it is set when a target is created.
SOURCES
Source names specified for a target.
Read-only list of sources specified for a target. The names returned
are suitable for passing to the set_source_files_properties command.
SOVERSION
What version number is this target.
For shared libraries VERSION and SOVERSION can be used to specify the
build version and api version respectively. When building or
installing appropriate symlinks are created if the platform supports
symlinks and the linker supports so-names. If only one of both is
specified the missing is assumed to have the same version number. For
shared libraries and executables on Windows the VERSION attribute is
parsed to extract a "major.minor" version number. These numbers are
used as the image version of the binary.
STATIC_LIBRARY_FLAGS
Extra flags to use when linking static libraries.
Extra flags to use when linking a static library.
SUFFIX
What comes after the library name.
A target property that can be set to override the suffix (such as
".so") on a library name.
TYPE
The type of the target.
This read-only property can be used to test the type of the given
target. It will be one of STATIC_LIBRARY, MODULE_LIBRARY,
SHARED_LIBRARY, EXECUTABLE or one of the internal target types.
VERSION
What version number is this target.
For shared libraries VERSION and SOVERSION can be used to specify the
build version and api version respectively. When building or
installing appropriate symlinks are created if the platform supports
symlinks and the linker supports so-names. If only one of both is
specified the missing is assumed to have the same version number. For
executables VERSION can be used to specify the build version. When
building or installing appropriate symlinks are created if the
platform supports symlinks. For shared libraries and executables on
Windows the VERSION attribute is parsed to extract a "major.minor"
version number. These numbers are used as the image version of the
binary.
VS_KEYWORD
Visual Studio project keyword.
Can be set to change the visual studio keyword, for example QT
integration works better if this is set to Qt4VSv1.0.
VS_SCC_LOCALPATH
Visual Studio Source Code Control Provider.
Can be set to change the visual studio source code control local path
property.
VS_SCC_PROJECTNAME
Visual Studio Source Code Control Project.
Can be set to change the visual studio source code control project
name property.
VS_SCC_PROVIDER
Visual Studio Source Code Control Provider.
Can be set to change the visual studio source code control provider
property.
WIN32_EXECUTABLE
Build an executable with a WinMain entry point on windows.
When this property is set to true the executable when linked on
Windows will be created with a WinMain() entry point instead of of
just main().This makes it a GUI executable instead of a console
application. See the CMAKE_MFC_FLAG variable documentation to
configure use of MFC for WinMain executables.
XCODE_ATTRIBUTE_<an-attribute>
Set Xcode target attributes directly.
Tell the Xcode generator to set '<an-attribute>' to a given value in
the generated Xcode project. Ignored on other generators.
------------------------------------------------------------------------------
Properties on Tests
ENVIRONMENT
Specify environment variables that should be defined for running a
test.
If set to a list of environment variables and values of the form
MYVAR=value those environment variables will be defined while running
the test. The environment is restored to its previous state after the
test is done.
FAIL_REGULAR_EXPRESSION
If the output matches this regular expression the test will fail.
If set, if the output matches one of specified regular expressions,
the test will fail.For example: PASS_REGULAR_EXPRESSION
"[^a-z]Error;ERROR;Failed"
LABELS
Specify a list of text labels associated with a test.
The list is reported in dashboard submissions.
MEASUREMENT
Specify a CDASH measurement and value to be reported for a test.
If set to a name then that name will be reported to CDASH as a named
measurement with a value of 1. You may also specify a value by
setting MEASUREMENT to "measurement=value".
PASS_REGULAR_EXPRESSION
The output must match this regular expression for the test to pass.
If set, the test output will be checked against the specified regular
expressions and at least one of the regular expressions has to match,
otherwise the test will fail.
TIMEOUT
How many seconds to allow for this test.
This property if set will limit a test to not take more than the
specified number of seconds to run. If it exceeds that the test
process will be killed and ctest will move to the next test. This
setting takes precedence over CTEST_TESTING_TIMEOUT.
WILL_FAIL
If set to true, this will invert the pass/fail flag of the test.
This property can be used for tests that are expected to fail and
return a non zero return code.
------------------------------------------------------------------------------
Properties on Source Files
ABSTRACT
Is this source file an abstract class.
A property on a source file that indicates if the source file
represents a class that is abstract. This only makes sense for
languages that have a notion of an abstract class and it is only used
by some tools that wrap classes into other languages.
COMPILE_DEFINITIONS
Preprocessor definitions for compiling a source file.
The COMPILE_DEFINITIONS property may be set to a semicolon-separated
list of preprocessor definitions using the syntax VAR or VAR=value.
Function-style definitions are not supported. CMake will
automatically escape the value correctly for the native build system
(note that CMake language syntax may require escapes to specify some
values). This property may be set on a per-configuration basis using
the name COMPILE_DEFINITIONS_<CONFIG> where <CONFIG> is an upper-case
name (ex. "COMPILE_DEFINITIONS_DEBUG").
CMake will automatically drop some definitions that are not supported
by the native build tool. The VS6 IDE does not support definition
values with spaces (but NMake does). Xcode does not support
per-configuration definitions on source files.
Dislaimer: Most native build tools have poor support for escaping
certain values. CMake has work-arounds for many cases but some values
may just not be possible to pass correctly. If a value does not seem
to be escaped correctly, do not attempt to work-around the problem by
adding escape sequences to the value. Your work-around may break in a
future version of CMake that has improved escape support. Instead
consider defining the macro in a (configured) header file. Then
report the limitation.
COMPILE_DEFINITIONS_<CONFIG>
Per-configuration preprocessor definitions on a source file.
This is the configuration-specific version of COMPILE_DEFINITIONS.
Note that Xcode does not support per-configuration source file flags
so this property will be ignored by the Xcode generator.
COMPILE_FLAGS
Additional flags to be added when compiling this source file.
These flags will be added to the list of compile flags when this
source file builds. Use COMPILE_DEFINITIONS to pass additional
preprocessor definitions.
EXTERNAL_OBJECT
If set to true then this is an object file.
If this property is set to true then the source file is really an
object file and should not be compiled. It will still be linked into
the target though.
GENERATED
Is this source file generated as part of the build process.
If a source file is generated by the build process CMake will handle
it differently in temrs of dependency checking etc. Otherwise having
a non-existent source file could create problems.
HEADER_FILE_ONLY
Is this source file only a header file.
A property on a source file that indicates if the source file is a
header file with no associated implementation. This is set
automatically based on the file extension and is used by CMake to
determine is certain dependency information should be computed.
KEEP_EXTENSION
Make the output file have the same extension as the source file.
If this property is set then the file extension of the output file
will be the same as that of the source file. Normally the output file
extension is computed based on the language of the source file, for
example .cxx will go to a .o extension.
LABELS
Specify a list of text labels associated with a source file.
This property has meaning only when the source file is listed in a
target whose LABELS property is also set. No other semantics are
currently specified.
LANGUAGE
What programming language is the file.
A property that can be set to indicate what programming language the
source file is. If it is not set the language is determined based on
the file extension. Typical values are CXX C etc.
LOCATION
The full path to a source file.
A read only property on a SOURCE FILE that contains the full path to
the source file.
MACOSX_PACKAGE_LOCATION
Place a source file inside a Mac OS X bundle or framework.
Executable targets with the MACOSX_BUNDLE property set are built as
Mac OS X application bundles on Apple platforms. Shared library
targets with the FRAMEWORK property set are built as Mac OS X
frameworks on Apple platforms. Source files listed in the target with
this property set will be copied to a directory inside the bundle or
framework content folder specified by the property value. For bundles
the content folder is "<name>.app/Contents". For frameworks the
content folder is "<name>.framework/Versions/<version>". See the
PUBLIC_HEADER, PRIVATE_HEADER, and RESOURCE target properties for
specifying files meant for Headers, PrivateHeadres, or Resources
directories.
OBJECT_DEPENDS
Additional files on which a compiled object file depends.
Specifies a semicolon-separated list of full-paths to files on which
any object files compiled from this source file depend. An object
file will be recompiled if any of the named files is newer than it.
This property need not be used to specify the dependency of a source
file on a generated header file that it includes. Although the
property was originally introduced for this purpose, it is no longer
necessary. If the generated header file is created by a custom
command in the same target as the source file, the automatic
dependency scanning process will recognize the dependency. If the
generated header file is created by another target, an inter-target
dependency should be created with the add_dependencies command (if one
does not already exist due to linking relationships).
OBJECT_OUTPUTS
Additional outputs for a Makefile rule.
Additional outputs created by compilation of this source file. If any
of these outputs is missing the object will be recompiled. This is
supported only on Makefile generators and will be ignored on other
generators.
SYMBOLIC
Is this just a name for a rule.
If SYMBOLIC (boolean) is set to true the build system will be informed
that the source file is not actually created on disk but instead used
as a symbolic name for a build rule.
WRAP_EXCLUDE
Exclude this source file from any code wrapping techniques.
Some packages can wrap source files into alternate languages to
provide additional functionality. For example, C++ code can be
wrapped into Java or Python etc using SWIG etc. If WRAP_EXCLUDE is
set to true (1 etc) that indicates then this source file should not be
wrapped.
------------------------------------------------------------------------------
Properties on Cache Entries
ADVANCED
True if entry should be hidden by default in GUIs.
This is a boolean value indicating whether the entry is considered
interesting only for advanced configuration. The mark_as_advanced()
command modifies this property.
HELPSTRING
Help associated with entry in GUIs.
This string summarizes the purpose of an entry to help users set it
through a CMake GUI.
MODIFIED
Internal management property. Do not set or get.
This is an internal cache entry property managed by CMake to track
interactive user modification of entries. Ignore it.
STRINGS
Enumerate possible STRING entry values for GUI selection.
For cache entries with type STRING, this enumerates a set of values.
CMake GUIs may use this to provide a selection widget instead of a
generic string entry field. This is for convenience only. CMake does
not enforce that the value matches one of those listed.
TYPE
Widget type for entry in GUIs.
Cache entry values are always strings, but CMake GUIs present widgets
to help users set values. The GUIs use this property as a hint to
determine the widget type. Valid TYPE values are:
BOOL = Boolean ON/OFF value.
PATH = Path to a directory.
FILEPATH = Path to a file.
STRING = Generic string value.
INTERNAL = Do not present in GUI at all.
STATIC = Value managed by CMake, do not change.
UNINITIALIZED = Type not yet specified.
Generally the TYPE of a cache entry should be set by the command which
creates it (set, option, find_library, etc.).
VALUE
Value of a cache entry.
This property maps to the actual value of a cache entry. Setting this
property always sets the value without checking, so use with care.
------------------------------------------------------------------------------
Copyright
Copyright 2000-2009 Kitware, Inc., Insight Software Consortium. All rights
reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
Neither the names of Kitware, Inc., the Insight Software Consortium, nor the
names of their contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
------------------------------------------------------------------------------
See Also
The following resources are available to get help using CMake:
Home Page
http://www.cmake.org
The primary starting point for learning about CMake.
Frequently Asked Questions
http://www.cmake.org/Wiki/CMake_FAQ
A Wiki is provided containing answers to frequently asked questions.
Online Documentation
http://www.cmake.org/HTML/Documentation.html
Links to available documentation may be found on this web page.
Mailing List
http://www.cmake.org/HTML/MailingLists.html
For help and discussion about using cmake, a mailing list is provided
at cmake@cmake.org. The list is member-post-only but one may sign up
on the CMake web page. Please first read the full documentation at
http://www.cmake.org before posting questions to the list.
Summary of helpful links:
Home: http://www.cmake.org
Docs: http://www.cmake.org/HTML/Documentation.html
Mail: http://www.cmake.org/HTML/MailingLists.html
FAQ: http://www.cmake.org/Wiki/CMake_FAQ