barrier/tool/win/cmake/doc/cmake-2.8/ctest.txt

2631 lines
116 KiB
Plaintext
Raw Normal View History

ctest version 2.8.0
------------------------------------------------------------------------------
Name
ctest - Testing driver provided by CMake.
------------------------------------------------------------------------------
Usage
ctest [options]
------------------------------------------------------------------------------
Description
The "ctest" executable is the CMake test driver program. CMake-generated
build trees created for projects that use the ENABLE_TESTING and ADD_TEST
commands have testing support. This program will run the tests and report
results.
------------------------------------------------------------------------------
Options
-C <cfg>, --build-config <cfg>
Choose configuration to test.
Some CMake-generated build trees can have multiple build
configurations in the same tree. This option can be used to specify
which one should be tested. Example configurations are "Debug" and
"Release".
-V,--verbose
Enable verbose output from tests.
Test output is normally suppressed and only summary information is
displayed. This option will show all test output.
-VV,--extra-verbose
Enable more verbose output from tests.
Test output is normally suppressed and only summary information is
displayed. This option will show even more test output.
--debug
Displaying more verbose internals of CTest.
This feature will result in large number of output that is mostly
useful for debugging dashboard problems.
--output-on-failure
Output anything outputted by the test program if the test should fail.
This option can also be enabled by setting the environment variable
CTEST_OUTPUT_ON_FAILURE
-F
Enable failover.
This option allows ctest to resume a test set execution that was
previously interrupted. If no interruption occurred, the -F option
will have no effect.
-Q,--quiet
Make ctest quiet.
This option will suppress all the output. The output log file will
still be generated if the --output-log is specified. Options such as
--verbose, --extra-verbose, and --debug are ignored if --quiet is
specified.
-O <file>, --output-log <file>
Output to log file
This option tells ctest to write all its output to a log file.
-N,--show-only
Disable actual execution of tests.
This option tells ctest to list the tests that would be run but not
actually run them. Useful in conjunction with the -R and -E options.
-L <regex>, --label-regex <regex>
Run tests with labels matching regular expression.
This option tells ctest to run only the tests whose labels match the
given regular expression.
-R <regex>, --tests-regex <regex>
Run tests matching regular expression.
This option tells ctest to run only the tests whose names match the
given regular expression.
-E <regex>, --exclude-regex <regex>
Exclude tests matching regular expression.
This option tells ctest to NOT run the tests whose names match the
given regular expression.
-LE <regex>, --label-exclude <regex>
Exclude tests with labels matching regular expression.
This option tells ctest to NOT run the tests whose labels match the
given regular expression.
-D <dashboard>, --dashboard <dashboard>
Execute dashboard test
This option tells ctest to perform act as a Dart client and perform a
dashboard test. All tests are <Mode><Test>, where Mode can be
Experimental, Nightly, and Continuous, and Test can be Start, Update,
Configure, Build, Test, Coverage, and Submit.
-M <model>, --test-model <model>
Sets the model for a dashboard
This option tells ctest to act as a Dart client where the TestModel
can be Experimental, Nightly, and Continuous. Combining -M and -T is
similar to -D
-T <action>, --test-action <action>
Sets the dashboard action to perform
This option tells ctest to act as a Dart client and perform some
action such as start, build, test etc. Combining -M and -T is similar
to -D
--track <track>
Specify the track to submit dashboard to
Submit dashboard to specified track instead of default one. By
default, the dashboard is submitted to Nightly, Experimental, or
Continuous track, but by specifying this option, the track can be
arbitrary.
-S <script>, --script <script>
Execute a dashboard for a configuration
This option tells ctest to load in a configuration script which sets a
number of parameters such as the binary and source directories. Then
ctest will do what is required to create and run a dashboard. This
option basically sets up a dashboard and then runs ctest -D with the
appropriate options.
-SP <script>, --script-new-process <script>
Execute a dashboard for a configuration
This option does the same operations as -S but it will do them in a
seperate process. This is primarily useful in cases where the script
may modify the environment and you do not want the modified enviroment
to impact other -S scripts.
-A <file>, --add-notes <file>
Add a notes file with submission
This option tells ctest to include a notes file when submitting
dashboard.
-I [Start,End,Stride,test#,test#|Test file], --tests-information
Run a specific number of tests by number.
This option causes ctest to run tests starting at number Start, ending
at number End, and incrementing by Stride. Any additional numbers
after Stride are considered individual test numbers. Start, End,or
stride can be empty. Optionally a file can be given that contains the
same syntax as the command line.
-U, --union
Take the Union of -I and -R
When both -R and -I are specified by default the intersection of tests
are run. By specifying -U the union of tests is run instead.
--max-width <width>
Set the max width for a test name to output
Set the maximum width for each test name to show in the output. This
allows the user to widen the output to avoid cliping the test name
which can be very annoying.
--interactive-debug-mode [0|1]
Set the interactive mode to 0 or 1.
This option causes ctest to run tests in either an interactive mode or
a non-interactive mode. On Windows this means that in non-interactive
mode, all system debug pop up windows are blocked. In dashboard mode
(Experimental, Nightly, Continuous), the default is non-interactive.
When just running tests not for a dashboard the default is to allow
popups and interactive debugging.
--no-label-summary
Disable timing summary information for labels.
This option tells ctest to not print summary information for each
label associated with the tests run. If there are no labels on the
tests, nothing extra is printed.
--build-and-test
Configure, build and run a test.
This option tells ctest to configure (i.e. run cmake on), build, and
or execute a test. The configure and test steps are optional. The
arguments to this command line are the source and binary directories.
By default this will run CMake on the Source/Bin directories specified
unless --build-nocmake is specified. Both --build-makeprogram and
--build-generator MUST be provided to use --built-and-test. If
--test-command is specified then that will be run after the build is
complete. Other options that affect this mode are --build-target
--build-nocmake, --build-run-dir, --build-two-config, --build-exe-dir,
--build-project,--build-noclean, --build-options
--build-target
Specify a specific target to build.
This option goes with the --build-and-test option, if left out the all
target is built.
--build-nocmake
Run the build without running cmake first.
Skip the cmake step.
--build-run-dir
Specify directory to run programs from.
Directory where programs will be after it has been compiled.
--build-two-config
Run CMake twice
--build-exe-dir
Specify the directory for the executable.
--build-generator
Specify the generator to use.
--build-project
Specify the name of the project to build.
--build-makeprogram
Specify the make program to use.
--build-noclean
Skip the make clean step.
--build-config-sample
A sample executable to use to determine the configuraiton
A sample executable to use to determine the configuraiton that should
be used. e.g. Debug/Release/etc
--build-options
Add extra options to the build step.
This option must be the last option with the exception of
--test-command
--test-command
The test to run with the --build-and-test option.
--test-timeout
The time limit in seconds, internal use only.
--tomorrow-tag
Nightly or experimental starts with next day tag.
This is useful if the build will not finish in one day.
--ctest-config
The configuration file used to initialize CTest state when submitting
dashboards.
This option tells CTest to use different initialization file instead
of CTestConfiguration.tcl. This way multiple initialization files can
be used for example to submit to multiple dashboards.
--overwrite
Overwrite CTest configuration option.
By default ctest uses configuration options from configuration file.
This option will overwrite the configuration option.
--extra-submit <file>[;<file>]
Submit extra files to the dashboard.
This option will submit extra files to the dashboard.
--force-new-ctest-process
Run child CTest instances as new processes
By default CTest will run child CTest instances within the same
process. If this behavior is not desired, this argument will enforce
new processes for child CTest processes.
--submit-index
Submit individual dashboard tests with specific index
This option allows performing the same CTest action (such as test)
multiple times and submit all stages to the same dashboard (Dart2
required). Each execution requires different index.
--help-command <cmd> [<file>]
Show help for a single command and exit.
Prints the help for the command to stdout or to the specified file.
--help-command-list [<file>]
List available commands and exit.
Prints the list of all available listfile commands to stdout or the
specified file.
--help-commands [<file>]
Print help for all commands and exit.
Prints the help for all commands to stdout or to the specified file.
------------------------------------------------------------------------------
Generators
The following generators are available on this platform:
------------------------------------------------------------------------------
Commands
break
Break from an enclosing foreach or while loop.
break()
Breaks from an enclosing foreach loop or while loop
build_name
Deprecated. Use ${CMAKE_SYSTEM} and ${CMAKE_CXX_COMPILER} instead.
build_name(variable)
Sets the specified variable to a string representing the platform and
compiler settings. These values are now available through the
CMAKE_SYSTEM and CMAKE_CXX_COMPILER variables.
cmake_minimum_required
Set the minimum required version of cmake for a project.
cmake_minimum_required(VERSION major[.minor[.patch]]
[FATAL_ERROR])
If the current version of CMake is lower than that required it will
stop processing the project and report an error. When a version
higher than 2.4 is specified the command implicitly invokes
cmake_policy(VERSION major[.minor[.patch]])
which sets the cmake policy version level to the version specified.
When version 2.4 or lower is given the command implicitly invokes
cmake_policy(VERSION 2.4)
which enables compatibility features for CMake 2.4 and lower.
The FATAL_ERROR option is accepted but ignored by CMake 2.6 and
higher. It should be specified so CMake versions 2.4 and lower fail
with an error instead of just a warning.
cmake_policy
Manage CMake Policy settings.
As CMake evolves it is sometimes necessary to change existing behavior
in order to fix bugs or improve implementations of existing features.
The CMake Policy mechanism is designed to help keep existing projects
building as new versions of CMake introduce changes in behavior. Each
new policy (behavioral change) is given an identifier of the form
"CMP<NNNN>" where "<NNNN>" is an integer index. Documentation
associated with each policy describes the OLD and NEW behavior and the
reason the policy was introduced. Projects may set each policy to
select the desired behavior. When CMake needs to know which behavior
to use it checks for a setting specified by the project. If no
setting is available the OLD behavior is assumed and a warning is
produced requesting that the policy be set.
The cmake_policy command is used to set policies to OLD or NEW
behavior. While setting policies individually is supported, we
encourage projects to set policies based on CMake versions.
cmake_policy(VERSION major.minor[.patch])
Specify that the current CMake list file is written for the given
version of CMake. All policies introduced in the specified version or
earlier will be set to use NEW behavior. All policies introduced
after the specified version will be unset. This effectively requests
behavior preferred as of a given CMake version and tells newer CMake
versions to warn about their new policies. The policy version
specified must be at least 2.4 or the command will report an error.
In order to get compatibility features supporting versions earlier
than 2.4 see documentation of policy CMP0001.
cmake_policy(SET CMP<NNNN> NEW)
cmake_policy(SET CMP<NNNN> OLD)
Tell CMake to use the OLD or NEW behavior for a given policy.
Projects depending on the old behavior of a given policy may silence a
policy warning by setting the policy state to OLD. Alternatively one
may fix the project to work with the new behavior and set the policy
state to NEW.
cmake_policy(GET CMP<NNNN> <variable>)
Check whether a given policy is set to OLD or NEW behavior. The
output variable value will be "OLD" or "NEW" if the policy is set, and
empty otherwise.
CMake keeps policy settings on a stack, so changes made by the
cmake_policy command affect only the top of the stack. A new entry on
the policy stack is managed automatically for each subdirectory to
protect its parents and siblings. CMake also manages a new entry for
scripts loaded by include() and find_package() commands except when
invoked with the NO_POLICY_SCOPE option (see also policy CMP0011).
The cmake_policy command provides an interface to manage custom
entries on the policy stack:
cmake_policy(PUSH)
cmake_policy(POP)
Each PUSH must have a matching POP to erase any changes. This is
useful to make temporary changes to policy settings.
Functions and macros record policy settings when they are created and
use the pre-record policies when they are invoked. If the function or
macro implementation sets policies, the changes automatically
propagate up through callers until they reach the closest nested
policy stack entry.
configure_file
Copy a file to another location and modify its contents.
configure_file(<input> <output>
[COPYONLY] [ESCAPE_QUOTES] [@ONLY])
Copies a file <input> to file <output> and substitutes variable values
referenced in the file content. If <input> is a relative path it is
evaluated with respect to the current source directory. The <input>
must be a file, not a directory. If <output> is a relative path it is
evaluated with respect to the current binary directory. If <output>
names an existing directory the input file is placed in that directory
with its original name.
This command replaces any variables in the input file referenced as
${VAR} or @VAR@ with their values as determined by CMake. If a
variable is not defined, it will be replaced with nothing. If
COPYONLY is specified, then no variable expansion will take place. If
ESCAPE_QUOTES is specified then any substituted quotes will be C-style
escaped. The file will be configured with the current values of CMake
variables. If @ONLY is specified, only variables of the form @VAR@
will be replaces and ${VAR} will be ignored. This is useful for
configuring scripts that use ${VAR}. Any occurrences of #cmakedefine
VAR will be replaced with either #define VAR or /* #undef VAR */
depending on the setting of VAR in CMake. Any occurrences of
#cmakedefine01 VAR will be replaced with either #define VAR 1 or
#define VAR 0 depending on whether VAR evaluates to TRUE or FALSE in
CMake
ctest_build
Build the project.
ctest_build([BUILD build_dir] [RETURN_VALUE res] [APPEND]
[NUMBER_ERRORS val] [NUMBER_WARNINGS val])
Builds the given build directory and stores results in Build.xml. If
no BUILD is given, the CTEST_BINARY_DIRECTORY variable is used. The
RETURN_VALUE option specifies a variable in which to store the return
value of the native build tool. The NUMBER_ERRORS and NUMBER_WARNINGS
options specify variables in which to store the number of build errors
and warnings detected.
The APPEND option marks results for append to those previously
submitted to a dashboard server since the last ctest_start. Append
semantics are defined by the dashboard server in use.
ctest_configure
Configure the project build tree.
ctest_configure([BUILD build_dir] [SOURCE source_dir] [APPEND]
[OPTIONS options] [RETURN_VALUE res])
Configures the given build directory and stores results in
Configure.xml. If no BUILD is given, the CTEST_BINARY_DIRECTORY
variable is used. If no SOURCE is given, the CTEST_SOURCE_DIRECTORY
variable is used. The OPTIONS argument specifies command line
arguments to pass to the configuration tool. The RETURN_VALUE option
specifies a variable in which to store the return value of the native
build tool.
The APPEND option marks results for append to those previously
submitted to a dashboard server since the last ctest_start. Append
semantics are defined by the dashboard server in use.
ctest_coverage
Collect coverage tool results.
ctest_coverage([BUILD build_dir] [RETURN_VALUE res] [APPEND]
[LABELS label1 [label2 [...]]])
Perform the coverage of the given build directory and stores results
in Coverage.xml. The second argument is a variable that will hold
value.
The LABELS option filters the coverage report to include only source
files labeled with at least one of the labels specified.
The APPEND option marks results for append to those previously
submitted to a dashboard server since the last ctest_start. Append
semantics are defined by the dashboard server in use.
ctest_empty_binary_directory
empties the binary directory
ctest_empty_binary_directory( directory )
Removes a binary directory. This command will perform some checks
prior to deleting the directory in an attempt to avoid malicious or
accidental directory deletion.
ctest_memcheck
Run tests with a dynamic analysis tool.
ctest_memcheck([BUILD build_dir] [RETURN_VALUE res] [APPEND]
[START start number] [END end number]
[STRIDE stride number] [EXCLUDE exclude regex ]
[INCLUDE include regex]
[EXCLUDE_LABEL exclude regex]
[INCLUDE_LABEL label regex]
[PARALLEL_LEVEL level] )
Tests the given build directory and stores results in MemCheck.xml.
The second argument is a variable that will hold value. Optionally,
you can specify the starting test number START, the ending test number
END, the number of tests to skip between each test STRIDE, a regular
expression for tests to run INCLUDE, or a regular expression for tests
not to run EXCLUDE. EXCLUDE_LABEL and INCLUDE_LABEL are regular
expressions for tests to be included or excluded by the test property
LABEL. PARALLEL_LEVEL should be set to a positive number representing
the number of tests to be run in parallel.
The APPEND option marks results for append to those previously
submitted to a dashboard server since the last ctest_start. Append
semantics are defined by the dashboard server in use.
ctest_read_custom_files
read CTestCustom files.
ctest_read_custom_files( directory ... )
Read all the CTestCustom.ctest or CTestCustom.cmake files from the
given directory.
ctest_run_script
runs a ctest -S script
ctest_run_script([NEW_PROCESS] script_file_name script_file_name1
script_file_name2 ... [RETURN_VALUE var])
Runs a script or scripts much like if it was run from ctest -S. If no
argument is provided then the current script is run using the current
settings of the variables. If NEW_PROCESS is specified then each
script will be run in a seperate process.If RETURN_VALUE is specified
the return value of the last script run will be put into var.
ctest_sleep
sleeps for some amount of time
ctest_sleep( seconds )
ctest_sleep( time1 duration time2 )
With one argument it will sleep for a given number of seconds. With
three arguments it will wait for time2 - time1 - duration seconds.
ctest_start
Starts the testing for a given model
ctest_start(Model [TRACK <track>] [source [binary]])
Starts the testing for a given model. The command should be called
after the binary directory is initialized. If the 'source' and
'binary' directory are not specified, it reads the
CTEST_SOURCE_DIRECTORY and CTEST_BINARY_DIRECTORY. If the track is
specified, the submissions will go to the specified track.
ctest_submit
Submit results to a dashboard server.
ctest_submit([PARTS ...] [FILES ...] [RETURN_VALUE res])
By default all available parts are submitted if no PARTS or FILES are
specified. The PARTS option lists a subset of parts to be submitted.
Valid part names are:
Start = nothing
Update = ctest_update results, in Update.xml
Configure = ctest_configure results, in Configure.xml
Build = ctest_build results, in Build.xml
Test = ctest_test results, in Test.xml
Coverage = ctest_coverage results, in Coverage.xml
MemCheck = ctest_memcheck results, in DynamicAnalysis.xml
Notes = Files listed by CTEST_NOTES_FILES, in Notes.xml
ExtraFiles = Files listed by CTEST_EXTRA_SUBMIT_FILES
Submit = nothing
The FILES option explicitly lists specific files to be submitted.
Each individual file must exist at the time of the call.
ctest_test
Run tests in the project build tree.
ctest_test([BUILD build_dir] [APPEND]
[START start number] [END end number]
[STRIDE stride number] [EXCLUDE exclude regex ]
[INCLUDE include regex] [RETURN_VALUE res]
[EXCLUDE_LABEL exclude regex]
[INCLUDE_LABEL label regex]
[PARALLEL_LEVEL level])
Tests the given build directory and stores results in Test.xml. The
second argument is a variable that will hold value. Optionally, you
can specify the starting test number START, the ending test number
END, the number of tests to skip between each test STRIDE, a regular
expression for tests to run INCLUDE, or a regular expression for tests
to not run EXCLUDE. EXCLUDE_LABEL and INCLUDE_LABEL are regular
expression for test to be included or excluded by the test property
LABEL. PARALLEL_LEVEL should be set to a positive number representing
the number of tests to be run in parallel.
The APPEND option marks results for append to those previously
submitted to a dashboard server since the last ctest_start. Append
semantics are defined by the dashboard server in use.
ctest_update
Update the work tree from version control.
ctest_update([SOURCE source] [RETURN_VALUE res])
Updates the given source directory and stores results in Update.xml.
If no SOURCE is given, the CTEST_SOURCE_DIRECTORY variable is used.
The RETURN_VALUE option specifies a variable in which to store the
result, which is the number of files updated or -1 on error.
else
Starts the else portion of an if block.
else(expression)
See the if command.
elseif
Starts the elseif portion of an if block.
elseif(expression)
See the if command.
endforeach
Ends a list of commands in a FOREACH block.
endforeach(expression)
See the FOREACH command.
endfunction
Ends a list of commands in a function block.
endfunction(expression)
See the function command.
endif
Ends a list of commands in an if block.
endif(expression)
See the if command.
endmacro
Ends a list of commands in a macro block.
endmacro(expression)
See the macro command.
endwhile
Ends a list of commands in a while block.
endwhile(expression)
See the while command.
exec_program
Deprecated. Use the execute_process() command instead.
Run an executable program during the processing of the CMakeList.txt
file.
exec_program(Executable [directory in which to run]
[ARGS <arguments to executable>]
[OUTPUT_VARIABLE <var>]
[RETURN_VALUE <var>])
The executable is run in the optionally specified directory. The
executable can include arguments if it is double quoted, but it is
better to use the optional ARGS argument to specify arguments to the
program. This is because cmake will then be able to escape spaces in
the executable path. An optional argument OUTPUT_VARIABLE specifies a
variable in which to store the output. To capture the return value of
the execution, provide a RETURN_VALUE. If OUTPUT_VARIABLE is
specified, then no output will go to the stdout/stderr of the console
running cmake.
execute_process
Execute one or more child processes.
execute_process(COMMAND <cmd1> [args1...]]
[COMMAND <cmd2> [args2...] [...]]
[WORKING_DIRECTORY <directory>]
[TIMEOUT <seconds>]
[RESULT_VARIABLE <variable>]
[OUTPUT_VARIABLE <variable>]
[ERROR_VARIABLE <variable>]
[INPUT_FILE <file>]
[OUTPUT_FILE <file>]
[ERROR_FILE <file>]
[OUTPUT_QUIET]
[ERROR_QUIET]
[OUTPUT_STRIP_TRAILING_WHITESPACE]
[ERROR_STRIP_TRAILING_WHITESPACE])
Runs the given sequence of one or more commands with the standard
output of each process piped to the standard input of the next. A
single standard error pipe is used for all processes. If
WORKING_DIRECTORY is given the named directory will be set as the
current working directory of the child processes. If TIMEOUT is given
the child processes will be terminated if they do not finish in the
specified number of seconds (fractions are allowed). If
RESULT_VARIABLE is given the variable will be set to contain the
result of running the processes. This will be an integer return code
from the last child or a string describing an error condition. If
OUTPUT_VARIABLE or ERROR_VARIABLE are given the variable named will be
set with the contents of the standard output and standard error pipes
respectively. If the same variable is named for both pipes their
output will be merged in the order produced. If INPUT_FILE,
OUTPUT_FILE, or ERROR_FILE is given the file named will be attached to
the standard input of the first process, standard output of the last
process, or standard error of all processes respectively. If
OUTPUT_QUIET or ERROR_QUIET is given then the standard output or
standard error results will be quietly ignored. If more than one
OUTPUT_* or ERROR_* option is given for the same pipe the precedence
is not specified. If no OUTPUT_* or ERROR_* options are given the
output will be shared with the corresponding pipes of the CMake
process itself.
The execute_process command is a newer more powerful version of
exec_program, but the old command has been kept for compatibility.
file
File manipulation command.
file(WRITE filename "message to write"... )
file(APPEND filename "message to write"... )
file(READ filename variable [LIMIT numBytes] [OFFSET offset] [HEX])
file(STRINGS filename variable [LIMIT_COUNT num]
[LIMIT_INPUT numBytes] [LIMIT_OUTPUT numBytes]
[LENGTH_MINIMUM numBytes] [LENGTH_MAXIMUM numBytes]
[NEWLINE_CONSUME] [REGEX regex]
[NO_HEX_CONVERSION])
file(GLOB variable [RELATIVE path] [globbing expressions]...)
file(GLOB_RECURSE variable [RELATIVE path]
[FOLLOW_SYMLINKS] [globbing expressions]...)
file(RENAME <oldname> <newname>)
file(REMOVE [file1 ...])
file(REMOVE_RECURSE [file1 ...])
file(MAKE_DIRECTORY [directory1 directory2 ...])
file(RELATIVE_PATH variable directory file)
file(TO_CMAKE_PATH path result)
file(TO_NATIVE_PATH path result)
file(DOWNLOAD url file [TIMEOUT timeout] [STATUS status] [LOG log])
WRITE will write a message into a file called 'filename'. It
overwrites the file if it already exists, and creates the file if it
does not exist.
APPEND will write a message into a file same as WRITE, except it will
append it to the end of the file
READ will read the content of a file and store it into the variable.
It will start at the given offset and read up to numBytes. If the
argument HEX is given, the binary data will be converted to
hexadecimal representation and this will be stored in the variable.
STRINGS will parse a list of ASCII strings from a file and store it in
a variable. Binary data in the file are ignored. Carriage return
(CR) characters are ignored. It works also for Intel Hex and Motorola
S-record files, which are automatically converted to binary format
when reading them. Disable this using NO_HEX_CONVERSION.
LIMIT_COUNT sets the maximum number of strings to return. LIMIT_INPUT
sets the maximum number of bytes to read from the input file.
LIMIT_OUTPUT sets the maximum number of bytes to store in the output
variable. LENGTH_MINIMUM sets the minimum length of a string to
return. Shorter strings are ignored. LENGTH_MAXIMUM sets the maximum
length of a string to return. Longer strings are split into strings
no longer than the maximum length. NEWLINE_CONSUME allows newlines to
be included in strings instead of terminating them.
REGEX specifies a regular expression that a string must match to be
returned. Typical usage
file(STRINGS myfile.txt myfile)
stores a list in the variable "myfile" in which each item is a line
from the input file.
GLOB will generate a list of all files that match the globbing
expressions and store it into the variable. Globbing expressions are
similar to regular expressions, but much simpler. If RELATIVE flag is
specified for an expression, the results will be returned as a
relative path to the given path.
Examples of globbing expressions include:
*.cxx - match all files with extension cxx
*.vt? - match all files with extension vta,...,vtz
f[3-5].txt - match files f3.txt, f4.txt, f5.txt
GLOB_RECURSE will generate a list similar to the regular GLOB, except
it will traverse all the subdirectories of the matched directory and
match the files. Subdirectories that are symlinks are only traversed
if FOLLOW_SYMLINKS is given or cmake policy CMP0009 is not set to NEW.
See cmake --help-policy CMP0009 for more information.
Examples of recursive globbing include:
/dir/*.py - match all python files in /dir and subdirectories
MAKE_DIRECTORY will create the given directories, also if their parent
directories don't exist yet
RENAME moves a file or directory within a filesystem, replacing the
destination atomically.
REMOVE will remove the given files, also in subdirectories
REMOVE_RECURSE will remove the given files and directories, also
non-empty directories
RELATIVE_PATH will determine relative path from directory to the given
file.
TO_CMAKE_PATH will convert path into a cmake style path with unix /.
The input can be a single path or a system path like "$ENV{PATH}".
Note the double quotes around the ENV call TO_CMAKE_PATH only takes
one argument.
TO_NATIVE_PATH works just like TO_CMAKE_PATH, but will convert from a
cmake style path into the native path style \ for windows and / for
UNIX.
DOWNLOAD will download the given URL to the given file. If LOG var is
specified a log of the download will be put in var. If STATUS var is
specified the status of the operation will be put in var. The status
is returned in a list of length 2. The first element is the numeric
return value for the operation, and the second element is a string
value for the error. A 0 numeric error means no error in the
operation. If TIMEOUT time is specified, the operation will timeout
after time seconds, time should be specified as an integer.
The file() command also provides COPY and INSTALL signatures:
file(<COPY|INSTALL> files... DESTINATION <dir>
[FILE_PERMISSIONS permissions...]
[DIRECTORY_PERMISSIONS permissions...]
[NO_SOURCE_PERMISSIONS] [USE_SOURCE_PERMISSIONS]
[FILES_MATCHING]
[[PATTERN <pattern> | REGEX <regex>]
[EXCLUDE] [PERMISSIONS permissions...]] [...])
The COPY signature copies files, directories, and symlinks to a
destination folder. Relative input paths are evaluated with respect
to the current source directory, and a relative destination is
evaluated with respect to the current build directory. Copying
preserves input file timestamps, and optimizes out a file if it exists
at the destination with the same timestamp. Copying preserves input
permissions unless explicit permissions or NO_SOURCE_PERMISSIONS are
given (default is USE_SOURCE_PERMISSIONS). See the install(DIRECTORY)
command for documentation of permissions, PATTERN, REGEX, and EXCLUDE
options.
The INSTALL signature differs slightly from COPY: it prints status
messages, and NO_SOURCE_PERMISSIONS is default. Installation scripts
generated by the install() command use this signature (with some
undocumented options for internal use).
find_file
Find the full path to a file.
find_file(<VAR> name1 [path1 path2 ...])
This is the short-hand signature for the command that is sufficient in
many cases. It is the same as find_file(<VAR> name1 [PATHS path1
path2 ...])
find_file(
<VAR>
name | NAMES name1 [name2 ...]
[HINTS path1 [path2 ... ENV var]]
[PATHS path1 [path2 ... ENV var]]
[PATH_SUFFIXES suffix1 [suffix2 ...]]
[DOC "cache documentation string"]
[NO_DEFAULT_PATH]
[NO_CMAKE_ENVIRONMENT_PATH]
[NO_CMAKE_PATH]
[NO_SYSTEM_ENVIRONMENT_PATH]
[NO_CMAKE_SYSTEM_PATH]
[CMAKE_FIND_ROOT_PATH_BOTH |
ONLY_CMAKE_FIND_ROOT_PATH |
NO_CMAKE_FIND_ROOT_PATH]
)
This command is used to find a full path to named file. A cache entry
named by <VAR> is created to store the result of this command. If the
full path to a file is found the result is stored in the variable and
the search will not be repeated unless the variable is cleared. If
nothing is found, the result will be <VAR>-NOTFOUND, and the search
will be attempted again the next time find_file is invoked with the
same variable. The name of the full path to a file that is searched
for is specified by the names listed after the NAMES argument.
Additional search locations can be specified after the PATHS argument.
If ENV var is found in the HINTS or PATHS section the environment
variable var will be read and converted from a system environment
variable to a cmake style list of paths. For example ENV PATH would
be a way to list the system path variable. The argument after DOC
will be used for the documentation string in the cache. PATH_SUFFIXES
specifies additional subdirectories to check below each search path.
If NO_DEFAULT_PATH is specified, then no additional paths are added to
the search. If NO_DEFAULT_PATH is not specified, the search process
is as follows:
1. Search paths specified in cmake-specific cache variables. These
are intended to be used on the command line with a -DVAR=value. This
can be skipped if NO_CMAKE_PATH is passed.
<prefix>/include for each <prefix> in CMAKE_PREFIX_PATH
CMAKE_INCLUDE_PATH
CMAKE_FRAMEWORK_PATH
2. Search paths specified in cmake-specific environment variables.
These are intended to be set in the user's shell configuration. This
can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed.
<prefix>/include for each <prefix> in CMAKE_PREFIX_PATH
CMAKE_INCLUDE_PATH
CMAKE_FRAMEWORK_PATH
3. Search the paths specified by the HINTS option. These should be
paths computed by system introspection, such as a hint provided by the
location of another item already found. Hard-coded guesses should be
specified with the PATHS option.
4. Search the standard system environment variables. This can be
skipped if NO_SYSTEM_ENVIRONMENT_PATH is an argument.
PATH
INCLUDE
5. Search cmake variables defined in the Platform files for the
current system. This can be skipped if NO_CMAKE_SYSTEM_PATH is
passed.
<prefix>/include for each <prefix> in CMAKE_SYSTEM_PREFIX_PATH
CMAKE_SYSTEM_INCLUDE_PATH
CMAKE_SYSTEM_FRAMEWORK_PATH
6. Search the paths specified by the PATHS option or in the
short-hand version of the command. These are typically hard-coded
guesses.
On Darwin or systems supporting OS X Frameworks, the cmake variable
CMAKE_FIND_FRAMEWORK can be set to empty or one of the following:
"FIRST" - Try to find frameworks before standard
libraries or headers. This is the default on Darwin.
"LAST" - Try to find frameworks after standard
libraries or headers.
"ONLY" - Only try to find frameworks.
"NEVER" - Never try to find frameworks.
On Darwin or systems supporting OS X Application Bundles, the cmake
variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the
following:
"FIRST" - Try to find application bundles before standard
programs. This is the default on Darwin.
"LAST" - Try to find application bundles after standard
programs.
"ONLY" - Only try to find application bundles.
"NEVER" - Never try to find application bundles.
The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more
directories to be prepended to all other search directories. This
effectively "re-roots" the entire search under given locations. By
default it is empty. It is especially useful when cross-compiling to
point to the root directory of the target environment and CMake will
search there too. By default at first the directories listed in
CMAKE_FIND_ROOT_PATH and then the non-rooted directories will be
searched. The default behavior can be adjusted by setting
CMAKE_FIND_ROOT_PATH_MODE_INCLUDE. This behavior can be manually
overridden on a per-call basis. By using CMAKE_FIND_ROOT_PATH_BOTH
the search order will be as described above. If
NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be
used. If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re-rooted
directories will be searched.
The default search order is designed to be most-specific to
least-specific for common use cases. Projects may override the order
by simply calling the command multiple times and using the NO_*
options:
find_file(<VAR> NAMES name PATHS paths... NO_DEFAULT_PATH)
find_file(<VAR> NAMES name)
Once one of the calls succeeds the result variable will be set and
stored in the cache so that no call will search again.
find_library
Find a library.
find_library(<VAR> name1 [path1 path2 ...])
This is the short-hand signature for the command that is sufficient in
many cases. It is the same as find_library(<VAR> name1 [PATHS path1
path2 ...])
find_library(
<VAR>
name | NAMES name1 [name2 ...]
[HINTS path1 [path2 ... ENV var]]
[PATHS path1 [path2 ... ENV var]]
[PATH_SUFFIXES suffix1 [suffix2 ...]]
[DOC "cache documentation string"]
[NO_DEFAULT_PATH]
[NO_CMAKE_ENVIRONMENT_PATH]
[NO_CMAKE_PATH]
[NO_SYSTEM_ENVIRONMENT_PATH]
[NO_CMAKE_SYSTEM_PATH]
[CMAKE_FIND_ROOT_PATH_BOTH |
ONLY_CMAKE_FIND_ROOT_PATH |
NO_CMAKE_FIND_ROOT_PATH]
)
This command is used to find a library. A cache entry named by <VAR>
is created to store the result of this command. If the library is
found the result is stored in the variable and the search will not be
repeated unless the variable is cleared. If nothing is found, the
result will be <VAR>-NOTFOUND, and the search will be attempted again
the next time find_library is invoked with the same variable. The
name of the library that is searched for is specified by the names
listed after the NAMES argument. Additional search locations can be
specified after the PATHS argument. If ENV var is found in the HINTS
or PATHS section the environment variable var will be read and
converted from a system environment variable to a cmake style list of
paths. For example ENV PATH would be a way to list the system path
variable. The argument after DOC will be used for the documentation
string in the cache. PATH_SUFFIXES specifies additional
subdirectories to check below each search path.
If NO_DEFAULT_PATH is specified, then no additional paths are added to
the search. If NO_DEFAULT_PATH is not specified, the search process
is as follows:
1. Search paths specified in cmake-specific cache variables. These
are intended to be used on the command line with a -DVAR=value. This
can be skipped if NO_CMAKE_PATH is passed.
<prefix>/lib for each <prefix> in CMAKE_PREFIX_PATH
CMAKE_LIBRARY_PATH
CMAKE_FRAMEWORK_PATH
2. Search paths specified in cmake-specific environment variables.
These are intended to be set in the user's shell configuration. This
can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed.
<prefix>/lib for each <prefix> in CMAKE_PREFIX_PATH
CMAKE_LIBRARY_PATH
CMAKE_FRAMEWORK_PATH
3. Search the paths specified by the HINTS option. These should be
paths computed by system introspection, such as a hint provided by the
location of another item already found. Hard-coded guesses should be
specified with the PATHS option.
4. Search the standard system environment variables. This can be
skipped if NO_SYSTEM_ENVIRONMENT_PATH is an argument.
PATH
LIB
5. Search cmake variables defined in the Platform files for the
current system. This can be skipped if NO_CMAKE_SYSTEM_PATH is
passed.
<prefix>/lib for each <prefix> in CMAKE_SYSTEM_PREFIX_PATH
CMAKE_SYSTEM_LIBRARY_PATH
CMAKE_SYSTEM_FRAMEWORK_PATH
6. Search the paths specified by the PATHS option or in the
short-hand version of the command. These are typically hard-coded
guesses.
On Darwin or systems supporting OS X Frameworks, the cmake variable
CMAKE_FIND_FRAMEWORK can be set to empty or one of the following:
"FIRST" - Try to find frameworks before standard
libraries or headers. This is the default on Darwin.
"LAST" - Try to find frameworks after standard
libraries or headers.
"ONLY" - Only try to find frameworks.
"NEVER" - Never try to find frameworks.
On Darwin or systems supporting OS X Application Bundles, the cmake
variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the
following:
"FIRST" - Try to find application bundles before standard
programs. This is the default on Darwin.
"LAST" - Try to find application bundles after standard
programs.
"ONLY" - Only try to find application bundles.
"NEVER" - Never try to find application bundles.
The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more
directories to be prepended to all other search directories. This
effectively "re-roots" the entire search under given locations. By
default it is empty. It is especially useful when cross-compiling to
point to the root directory of the target environment and CMake will
search there too. By default at first the directories listed in
CMAKE_FIND_ROOT_PATH and then the non-rooted directories will be
searched. The default behavior can be adjusted by setting
CMAKE_FIND_ROOT_PATH_MODE_LIBRARY. This behavior can be manually
overridden on a per-call basis. By using CMAKE_FIND_ROOT_PATH_BOTH
the search order will be as described above. If
NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be
used. If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re-rooted
directories will be searched.
The default search order is designed to be most-specific to
least-specific for common use cases. Projects may override the order
by simply calling the command multiple times and using the NO_*
options:
find_library(<VAR> NAMES name PATHS paths... NO_DEFAULT_PATH)
find_library(<VAR> NAMES name)
Once one of the calls succeeds the result variable will be set and
stored in the cache so that no call will search again.
If the library found is a framework, then VAR will be set to the full
path to the framework <fullPath>/A.framework. When a full path to a
framework is used as a library, CMake will use a -framework A, and a
-F<fullPath> to link the framework to the target.
find_package
Load settings for an external project.
find_package(<package> [version] [EXACT] [QUIET]
[[REQUIRED|COMPONENTS] [components...]]
[NO_POLICY_SCOPE])
Finds and loads settings from an external project. <package>_FOUND
will be set to indicate whether the package was found. When the
package is found package-specific information is provided through
variables documented by the package itself. The QUIET option disables
messages if the package cannot be found. The REQUIRED option stops
processing with an error message if the package cannot be found. A
package-specific list of components may be listed after the REQUIRED
option or after the COMPONENTS option if no REQUIRED option is given.
The [version] argument requests a version with which the package found
should be compatible (format is major[.minor[.patch[.tweak]]]). The
EXACT option requests that the version be matched exactly. If no
[version] is given to a recursive invocation inside a find-module, the
[version] and EXACT arguments are forwarded automatically from the
outer call. Version support is currently provided only on a
package-by-package basis (details below).
User code should generally look for packages using the above simple
signature. The remainder of this command documentation specifies the
full command signature and details of the search process. Project
maintainers wishing to provide a package to be found by this command
are encouraged to read on.
The command has two modes by which it searches for packages: "Module"
mode and "Config" mode. Module mode is available when the command is
invoked with the above reduced signature. CMake searches for a file
called "Find<package>.cmake" in the CMAKE_MODULE_PATH followed by the
CMake installation. If the file is found, it is read and processed by
CMake. It is responsible for finding the package, checking the
version, and producing any needed messages. Many find-modules provide
limited or no support for versioning; check the module documentation.
If no module is found the command proceeds to Config mode.
The complete Config mode command signature is:
find_package(<package> [version] [EXACT] [QUIET]
[[REQUIRED|COMPONENTS] [components...]] [NO_MODULE]
[NO_POLICY_SCOPE]
[NAMES name1 [name2 ...]]
[CONFIGS config1 [config2 ...]]
[HINTS path1 [path2 ... ]]
[PATHS path1 [path2 ... ]]
[PATH_SUFFIXES suffix1 [suffix2 ...]]
[NO_DEFAULT_PATH]
[NO_CMAKE_ENVIRONMENT_PATH]
[NO_CMAKE_PATH]
[NO_SYSTEM_ENVIRONMENT_PATH]
[NO_CMAKE_PACKAGE_REGISTRY]
[NO_CMAKE_BUILDS_PATH]
[NO_CMAKE_SYSTEM_PATH]
[CMAKE_FIND_ROOT_PATH_BOTH |
ONLY_CMAKE_FIND_ROOT_PATH |
NO_CMAKE_FIND_ROOT_PATH])
The NO_MODULE option may be used to skip Module mode explicitly. It
is also implied by use of options not specified in the reduced
signature.
Config mode attempts to locate a configuration file provided by the
package to be found. A cache entry called <package>_DIR is created to
hold the directory containing the file. By default the command
searches for a package with the name <package>. If the NAMES option
is given the names following it are used instead of <package>. The
command searches for a file called "<name>Config.cmake" or
"<lower-case-name>-config.cmake" for each name specified. A
replacement set of possible configuration file names may be given
using the CONFIGS option. The search procedure is specified below.
Once found, the configuration file is read and processed by CMake.
Since the file is provided by the package it already knows the
location of package contents. The full path to the configuration file
is stored in the cmake variable <package>_CONFIG.
If the package configuration file cannot be found CMake will generate
an error describing the problem unless the QUIET argument is
specified. If REQUIRED is specified and the package is not found a
fatal error is generated and the configure step stops executing. If
<package>_DIR has been set to a directory not containing a
configuration file CMake will ignore it and search from scratch.
When the [version] argument is given Config mode will only find a
version of the package that claims compatibility with the requested
version (format is major[.minor[.patch[.tweak]]]). If the EXACT
option is given only a version of the package claiming an exact match
of the requested version may be found. CMake does not establish any
convention for the meaning of version numbers. Package version
numbers are checked by "version" files provided by the packages
themselves. For a candidate package configuration file
"<config-file>.cmake" the corresponding version file is located next
to it and named either "<config-file>-version.cmake" or
"<config-file>Version.cmake". If no such version file is available
then the configuration file is assumed to not be compatible with any
requested version. When a version file is found it is loaded to check
the requested version number. The version file is loaded in a nested
scope in which the following variables have been defined:
PACKAGE_FIND_NAME = the <package> name
PACKAGE_FIND_VERSION = full requested version string
PACKAGE_FIND_VERSION_MAJOR = major version if requested, else 0
PACKAGE_FIND_VERSION_MINOR = minor version if requested, else 0
PACKAGE_FIND_VERSION_PATCH = patch version if requested, else 0
PACKAGE_FIND_VERSION_TWEAK = tweak version if requested, else 0
PACKAGE_FIND_VERSION_COUNT = number of version components, 0 to 4
The version file checks whether it satisfies the requested version and
sets these variables:
PACKAGE_VERSION = full provided version string
PACKAGE_VERSION_EXACT = true if version is exact match
PACKAGE_VERSION_COMPATIBLE = true if version is compatible
PACKAGE_VERSION_UNSUITABLE = true if unsuitable as any version
These variables are checked by the find_package command to determine
whether the configuration file provides an acceptable version. They
are not available after the find_package call returns. If the version
is acceptable the following variables are set:
<package>_VERSION = full provided version string
<package>_VERSION_MAJOR = major version if provided, else 0
<package>_VERSION_MINOR = minor version if provided, else 0
<package>_VERSION_PATCH = patch version if provided, else 0
<package>_VERSION_TWEAK = tweak version if provided, else 0
<package>_VERSION_COUNT = number of version components, 0 to 4
and the corresponding package configuration file is loaded. When
multiple package configuration files are available whose version files
claim compatibility with the version requested it is unspecified which
one is chosen. No attempt is made to choose a highest or closest
version number.
Config mode provides an elaborate interface and search procedure.
Much of the interface is provided for completeness and for use
internally by find-modules loaded by Module mode. Most user code
should simply call
find_package(<package> [major[.minor]] [EXACT] [REQUIRED|QUIET])
in order to find a package. Package maintainers providing CMake
package configuration files are encouraged to name and install them
such that the procedure outlined below will find them without
requiring use of additional options.
CMake constructs a set of possible installation prefixes for the
package. Under each prefix several directories are searched for a
configuration file. The tables below show the directories searched.
Each entry is meant for installation trees following Windows (W), UNIX
(U), or Apple (A) conventions.
<prefix>/ (W)
<prefix>/(cmake|CMake)/ (W)
<prefix>/<name>*/ (W)
<prefix>/<name>*/(cmake|CMake)/ (W)
<prefix>/(share|lib)/cmake/<name>*/ (U)
<prefix>/(share|lib)/<name>*/ (U)
<prefix>/(share|lib)/<name>*/(cmake|CMake)/ (U)
On systems supporting OS X Frameworks and Application Bundles the
following directories are searched for frameworks or bundles
containing a configuration file:
<prefix>/<name>.framework/Resources/ (A)
<prefix>/<name>.framework/Resources/CMake/ (A)
<prefix>/<name>.framework/Versions/*/Resources/ (A)
<prefix>/<name>.framework/Versions/*/Resources/CMake/ (A)
<prefix>/<name>.app/Contents/Resources/ (A)
<prefix>/<name>.app/Contents/Resources/CMake/ (A)
In all cases the <name> is treated as case-insensitive and corresponds
to any of the names specified (<package> or names given by NAMES). If
PATH_SUFFIXES is specified the suffixes are appended to each (W) or
(U) directory entry one-by-one.
This set of directories is intended to work in cooperation with
projects that provide configuration files in their installation trees.
Directories above marked with (W) are intended for installations on
Windows where the prefix may point at the top of an application's
installation directory. Those marked with (U) are intended for
installations on UNIX platforms where the prefix is shared by multiple
packages. This is merely a convention, so all (W) and (U) directories
are still searched on all platforms. Directories marked with (A) are
intended for installations on Apple platforms. The cmake variables
CMAKE_FIND_FRAMEWORK and CMAKE_FIND_APPBUNDLE determine the order of
preference as specified below.
The set of installation prefixes is constructed using the following
steps. If NO_DEFAULT_PATH is specified all NO_* options are enabled.
1. Search paths specified in cmake-specific cache variables. These
are intended to be used on the command line with a -DVAR=value. This
can be skipped if NO_CMAKE_PATH is passed.
CMAKE_PREFIX_PATH
CMAKE_FRAMEWORK_PATH
CMAKE_APPBUNDLE_PATH
2. Search paths specified in cmake-specific environment variables.
These are intended to be set in the user's shell configuration. This
can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed.
CMAKE_PREFIX_PATH
CMAKE_FRAMEWORK_PATH
CMAKE_APPBUNDLE_PATH
3. Search paths specified by the HINTS option. These should be paths
computed by system introspection, such as a hint provided by the
location of another item already found. Hard-coded guesses should be
specified with the PATHS option.
4. Search the standard system environment variables. This can be
skipped if NO_SYSTEM_ENVIRONMENT_PATH is passed. Path entries ending
in "/bin" or "/sbin" are automatically converted to their parent
directories.
PATH
5. Search project build trees recently configured in a CMake GUI.
This can be skipped if NO_CMAKE_BUILDS_PATH is passed. It is intended
for the case when a user is building multiple dependent projects one
after another.
6. Search paths stored in the CMake user package registry. This can
be skipped if NO_CMAKE_PACKAGE_REGISTRY is passed. Paths are stored
in the registry when CMake configures a project that invokes
export(PACKAGE <name>). See the export(PACKAGE) command documentation
for more details.
7. Search cmake variables defined in the Platform files for the
current system. This can be skipped if NO_CMAKE_SYSTEM_PATH is
passed.
CMAKE_SYSTEM_PREFIX_PATH
CMAKE_SYSTEM_FRAMEWORK_PATH
CMAKE_SYSTEM_APPBUNDLE_PATH
8. Search paths specified by the PATHS option. These are typically
hard-coded guesses.
On Darwin or systems supporting OS X Frameworks, the cmake variable
CMAKE_FIND_FRAMEWORK can be set to empty or one of the following:
"FIRST" - Try to find frameworks before standard
libraries or headers. This is the default on Darwin.
"LAST" - Try to find frameworks after standard
libraries or headers.
"ONLY" - Only try to find frameworks.
"NEVER" - Never try to find frameworks.
On Darwin or systems supporting OS X Application Bundles, the cmake
variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the
following:
"FIRST" - Try to find application bundles before standard
programs. This is the default on Darwin.
"LAST" - Try to find application bundles after standard
programs.
"ONLY" - Only try to find application bundles.
"NEVER" - Never try to find application bundles.
The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more
directories to be prepended to all other search directories. This
effectively "re-roots" the entire search under given locations. By
default it is empty. It is especially useful when cross-compiling to
point to the root directory of the target environment and CMake will
search there too. By default at first the directories listed in
CMAKE_FIND_ROOT_PATH and then the non-rooted directories will be
searched. The default behavior can be adjusted by setting
CMAKE_FIND_ROOT_PATH_MODE_PACKAGE. This behavior can be manually
overridden on a per-call basis. By using CMAKE_FIND_ROOT_PATH_BOTH
the search order will be as described above. If
NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be
used. If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re-rooted
directories will be searched.
The default search order is designed to be most-specific to
least-specific for common use cases. Projects may override the order
by simply calling the command multiple times and using the NO_*
options:
find_package(<package> PATHS paths... NO_DEFAULT_PATH)
find_package(<package>)
Once one of the calls succeeds the result variable will be set and
stored in the cache so that no call will search again.
See the cmake_policy() command documentation for discussion of the
NO_POLICY_SCOPE option.
find_path
Find the directory containing a file.
find_path(<VAR> name1 [path1 path2 ...])
This is the short-hand signature for the command that is sufficient in
many cases. It is the same as find_path(<VAR> name1 [PATHS path1
path2 ...])
find_path(
<VAR>
name | NAMES name1 [name2 ...]
[HINTS path1 [path2 ... ENV var]]
[PATHS path1 [path2 ... ENV var]]
[PATH_SUFFIXES suffix1 [suffix2 ...]]
[DOC "cache documentation string"]
[NO_DEFAULT_PATH]
[NO_CMAKE_ENVIRONMENT_PATH]
[NO_CMAKE_PATH]
[NO_SYSTEM_ENVIRONMENT_PATH]
[NO_CMAKE_SYSTEM_PATH]
[CMAKE_FIND_ROOT_PATH_BOTH |
ONLY_CMAKE_FIND_ROOT_PATH |
NO_CMAKE_FIND_ROOT_PATH]
)
This command is used to find a directory containing the named file. A
cache entry named by <VAR> is created to store the result of this
command. If the file in a directory is found the result is stored in
the variable and the search will not be repeated unless the variable
is cleared. If nothing is found, the result will be <VAR>-NOTFOUND,
and the search will be attempted again the next time find_path is
invoked with the same variable. The name of the file in a directory
that is searched for is specified by the names listed after the NAMES
argument. Additional search locations can be specified after the
PATHS argument. If ENV var is found in the HINTS or PATHS section the
environment variable var will be read and converted from a system
environment variable to a cmake style list of paths. For example ENV
PATH would be a way to list the system path variable. The argument
after DOC will be used for the documentation string in the cache.
PATH_SUFFIXES specifies additional subdirectories to check below each
search path.
If NO_DEFAULT_PATH is specified, then no additional paths are added to
the search. If NO_DEFAULT_PATH is not specified, the search process
is as follows:
1. Search paths specified in cmake-specific cache variables. These
are intended to be used on the command line with a -DVAR=value. This
can be skipped if NO_CMAKE_PATH is passed.
<prefix>/include for each <prefix> in CMAKE_PREFIX_PATH
CMAKE_INCLUDE_PATH
CMAKE_FRAMEWORK_PATH
2. Search paths specified in cmake-specific environment variables.
These are intended to be set in the user's shell configuration. This
can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed.
<prefix>/include for each <prefix> in CMAKE_PREFIX_PATH
CMAKE_INCLUDE_PATH
CMAKE_FRAMEWORK_PATH
3. Search the paths specified by the HINTS option. These should be
paths computed by system introspection, such as a hint provided by the
location of another item already found. Hard-coded guesses should be
specified with the PATHS option.
4. Search the standard system environment variables. This can be
skipped if NO_SYSTEM_ENVIRONMENT_PATH is an argument.
PATH
INCLUDE
5. Search cmake variables defined in the Platform files for the
current system. This can be skipped if NO_CMAKE_SYSTEM_PATH is
passed.
<prefix>/include for each <prefix> in CMAKE_SYSTEM_PREFIX_PATH
CMAKE_SYSTEM_INCLUDE_PATH
CMAKE_SYSTEM_FRAMEWORK_PATH
6. Search the paths specified by the PATHS option or in the
short-hand version of the command. These are typically hard-coded
guesses.
On Darwin or systems supporting OS X Frameworks, the cmake variable
CMAKE_FIND_FRAMEWORK can be set to empty or one of the following:
"FIRST" - Try to find frameworks before standard
libraries or headers. This is the default on Darwin.
"LAST" - Try to find frameworks after standard
libraries or headers.
"ONLY" - Only try to find frameworks.
"NEVER" - Never try to find frameworks.
On Darwin or systems supporting OS X Application Bundles, the cmake
variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the
following:
"FIRST" - Try to find application bundles before standard
programs. This is the default on Darwin.
"LAST" - Try to find application bundles after standard
programs.
"ONLY" - Only try to find application bundles.
"NEVER" - Never try to find application bundles.
The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more
directories to be prepended to all other search directories. This
effectively "re-roots" the entire search under given locations. By
default it is empty. It is especially useful when cross-compiling to
point to the root directory of the target environment and CMake will
search there too. By default at first the directories listed in
CMAKE_FIND_ROOT_PATH and then the non-rooted directories will be
searched. The default behavior can be adjusted by setting
CMAKE_FIND_ROOT_PATH_MODE_INCLUDE. This behavior can be manually
overridden on a per-call basis. By using CMAKE_FIND_ROOT_PATH_BOTH
the search order will be as described above. If
NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be
used. If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re-rooted
directories will be searched.
The default search order is designed to be most-specific to
least-specific for common use cases. Projects may override the order
by simply calling the command multiple times and using the NO_*
options:
find_path(<VAR> NAMES name PATHS paths... NO_DEFAULT_PATH)
find_path(<VAR> NAMES name)
Once one of the calls succeeds the result variable will be set and
stored in the cache so that no call will search again.
When searching for frameworks, if the file is specified as A/b.h, then
the framework search will look for A.framework/Headers/b.h. If that
is found the path will be set to the path to the framework. CMake
will convert this to the correct -F option to include the file.
find_program
Find an executable program.
find_program(<VAR> name1 [path1 path2 ...])
This is the short-hand signature for the command that is sufficient in
many cases. It is the same as find_program(<VAR> name1 [PATHS path1
path2 ...])
find_program(
<VAR>
name | NAMES name1 [name2 ...]
[HINTS path1 [path2 ... ENV var]]
[PATHS path1 [path2 ... ENV var]]
[PATH_SUFFIXES suffix1 [suffix2 ...]]
[DOC "cache documentation string"]
[NO_DEFAULT_PATH]
[NO_CMAKE_ENVIRONMENT_PATH]
[NO_CMAKE_PATH]
[NO_SYSTEM_ENVIRONMENT_PATH]
[NO_CMAKE_SYSTEM_PATH]
[CMAKE_FIND_ROOT_PATH_BOTH |
ONLY_CMAKE_FIND_ROOT_PATH |
NO_CMAKE_FIND_ROOT_PATH]
)
This command is used to find a program. A cache entry named by <VAR>
is created to store the result of this command. If the program is
found the result is stored in the variable and the search will not be
repeated unless the variable is cleared. If nothing is found, the
result will be <VAR>-NOTFOUND, and the search will be attempted again
the next time find_program is invoked with the same variable. The
name of the program that is searched for is specified by the names
listed after the NAMES argument. Additional search locations can be
specified after the PATHS argument. If ENV var is found in the HINTS
or PATHS section the environment variable var will be read and
converted from a system environment variable to a cmake style list of
paths. For example ENV PATH would be a way to list the system path
variable. The argument after DOC will be used for the documentation
string in the cache. PATH_SUFFIXES specifies additional
subdirectories to check below each search path.
If NO_DEFAULT_PATH is specified, then no additional paths are added to
the search. If NO_DEFAULT_PATH is not specified, the search process
is as follows:
1. Search paths specified in cmake-specific cache variables. These
are intended to be used on the command line with a -DVAR=value. This
can be skipped if NO_CMAKE_PATH is passed.
<prefix>/[s]bin for each <prefix> in CMAKE_PREFIX_PATH
CMAKE_PROGRAM_PATH
CMAKE_APPBUNDLE_PATH
2. Search paths specified in cmake-specific environment variables.
These are intended to be set in the user's shell configuration. This
can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed.
<prefix>/[s]bin for each <prefix> in CMAKE_PREFIX_PATH
CMAKE_PROGRAM_PATH
CMAKE_APPBUNDLE_PATH
3. Search the paths specified by the HINTS option. These should be
paths computed by system introspection, such as a hint provided by the
location of another item already found. Hard-coded guesses should be
specified with the PATHS option.
4. Search the standard system environment variables. This can be
skipped if NO_SYSTEM_ENVIRONMENT_PATH is an argument.
PATH
5. Search cmake variables defined in the Platform files for the
current system. This can be skipped if NO_CMAKE_SYSTEM_PATH is
passed.
<prefix>/[s]bin for each <prefix> in CMAKE_SYSTEM_PREFIX_PATH
CMAKE_SYSTEM_PROGRAM_PATH
CMAKE_SYSTEM_APPBUNDLE_PATH
6. Search the paths specified by the PATHS option or in the
short-hand version of the command. These are typically hard-coded
guesses.
On Darwin or systems supporting OS X Frameworks, the cmake variable
CMAKE_FIND_FRAMEWORK can be set to empty or one of the following:
"FIRST" - Try to find frameworks before standard
libraries or headers. This is the default on Darwin.
"LAST" - Try to find frameworks after standard
libraries or headers.
"ONLY" - Only try to find frameworks.
"NEVER" - Never try to find frameworks.
On Darwin or systems supporting OS X Application Bundles, the cmake
variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the
following:
"FIRST" - Try to find application bundles before standard
programs. This is the default on Darwin.
"LAST" - Try to find application bundles after standard
programs.
"ONLY" - Only try to find application bundles.
"NEVER" - Never try to find application bundles.
The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more
directories to be prepended to all other search directories. This
effectively "re-roots" the entire search under given locations. By
default it is empty. It is especially useful when cross-compiling to
point to the root directory of the target environment and CMake will
search there too. By default at first the directories listed in
CMAKE_FIND_ROOT_PATH and then the non-rooted directories will be
searched. The default behavior can be adjusted by setting
CMAKE_FIND_ROOT_PATH_MODE_PROGRAM. This behavior can be manually
overridden on a per-call basis. By using CMAKE_FIND_ROOT_PATH_BOTH
the search order will be as described above. If
NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be
used. If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re-rooted
directories will be searched.
The default search order is designed to be most-specific to
least-specific for common use cases. Projects may override the order
by simply calling the command multiple times and using the NO_*
options:
find_program(<VAR> NAMES name PATHS paths... NO_DEFAULT_PATH)
find_program(<VAR> NAMES name)
Once one of the calls succeeds the result variable will be set and
stored in the cache so that no call will search again.
foreach
Evaluate a group of commands for each value in a list.
foreach(loop_var arg1 arg2 ...)
COMMAND1(ARGS ...)
COMMAND2(ARGS ...)
...
endforeach(loop_var)
All commands between foreach and the matching endforeach are recorded
without being invoked. Once the endforeach is evaluated, the recorded
list of commands is invoked once for each argument listed in the
original foreach command. Before each iteration of the loop
"${loop_var}" will be set as a variable with the current value in the
list.
foreach(loop_var RANGE total)
foreach(loop_var RANGE start stop [step])
Foreach can also iterate over a generated range of numbers. There are
three types of this iteration:
* When specifying single number, the range will have elements 0 to
"total".
* When specifying two numbers, the range will have elements from the
first number to the second number.
* The third optional number is the increment used to iterate from the
first number to the second number.
foreach(loop_var IN [LISTS [list1 [...]]]
[ITEMS [item1 [...]]])
Iterates over a precise list of items. The LISTS option names
list-valued variables to be traversed, including empty elements (an
empty string is a zero-length list). The ITEMS option ends argument
parsing and includes all arguments following it in the iteration.
function
Start recording a function for later invocation as a command.
function(<name> [arg1 [arg2 [arg3 ...]]])
COMMAND1(ARGS ...)
COMMAND2(ARGS ...)
...
endfunction(<name>)
Define a function named <name> that takes arguments named arg1 arg2
arg3 (...). Commands listed after function, but before the matching
endfunction, are not invoked until the function is invoked. When it
is invoked, the commands recorded in the function are first modified
by replacing formal parameters (${arg1}) with the arguments passed,
and then invoked as normal commands. In addition to referencing the
formal parameters you can reference the variable ARGC which will be
set to the number of arguments passed into the function as well as
ARGV0 ARGV1 ARGV2 ... which will have the actual values of the
arguments passed in. This facilitates creating functions with
optional arguments. Additionally ARGV holds the list of all arguments
given to the function and ARGN holds the list of argument past the
last expected argument.
See the cmake_policy() command documentation for the behavior of
policies inside functions.
get_cmake_property
Get a property of the CMake instance.
get_cmake_property(VAR property)
Get a property from the CMake instance. The value of the property is
stored in the variable VAR. If the property is not found, CMake will
report an error. Some supported properties include: VARIABLES,
CACHE_VARIABLES, COMMANDS, MACROS, and COMPONENTS.
get_directory_property
Get a property of DIRECTORY scope.
get_directory_property(<variable> [DIRECTORY <dir>] <prop-name>)
Store a property of directory scope in the named variable. If the
property is not defined the empty-string is returned. The DIRECTORY
argument specifies another directory from which to retrieve the
property value. The specified directory must have already been
traversed by CMake.
get_directory_property(<variable> [DIRECTORY <dir>]
DEFINITION <var-name>)
Get a variable definition from a directory. This form is useful to
get a variable definition from another directory.
get_filename_component
Get a specific component of a full filename.
get_filename_component(VarName FileName
PATH|ABSOLUTE|NAME|EXT|NAME_WE|REALPATH
[CACHE])
Set VarName to be the path (PATH), file name (NAME), file extension
(EXT), file name without extension (NAME_WE) of FileName, the full
path (ABSOLUTE), or the full path with all symlinks resolved
(REALPATH). Note that the path is converted to Unix slashes format
and has no trailing slashes. The longest file extension is always
considered. If the optional CACHE argument is specified, the result
variable is added to the cache.
get_filename_component(VarName FileName
PROGRAM [PROGRAM_ARGS ArgVar]
[CACHE])
The program in FileName will be found in the system search path or
left as a full path. If PROGRAM_ARGS is present with PROGRAM, then
any command-line arguments present in the FileName string are split
from the program name and stored in ArgVar. This is used to separate
a program name from its arguments in a command line string.
get_property
Get a property.
get_property(<variable>
<GLOBAL |
DIRECTORY [dir] |
TARGET <target> |
SOURCE <source> |
TEST <test> |
CACHE <entry> |
VARIABLE>
PROPERTY <name>
[SET | DEFINED | BRIEF_DOCS | FULL_DOCS])
Get one property from one object in a scope. The first argument
specifies the variable in which to store the result. The second
argument determines the scope from which to get the property. It must
be one of the following:
GLOBAL scope is unique and does not accept a name.
DIRECTORY scope defaults to the current directory but another
directory (already processed by CMake) may be named by full or
relative path.
TARGET scope must name one existing target.
SOURCE scope must name one source file.
TEST scope must name one existing test.
CACHE scope must name one cache entry.
VARIABLE scope is unique and does not accept a name.
The required PROPERTY option is immediately followed by the name of
the property to get. If the property is not set an empty value is
returned. If the SET option is given the variable is set to a boolean
value indicating whether the property has been set. If the DEFINED
option is given the variable is set to a boolean value indicating
whether the property has been defined such as with define_property.
If BRIEF_DOCS or FULL_DOCS is given then the variable is set to a
string containing documentation for the requested property. If
documentation is requested for a property that has not been defined
NOTFOUND is returned.
if
Conditionally execute a group of commands.
if(expression)
# then section.
COMMAND1(ARGS ...)
COMMAND2(ARGS ...)
...
elseif(expression2)
# elseif section.
COMMAND1(ARGS ...)
COMMAND2(ARGS ...)
...
else(expression)
# else section.
COMMAND1(ARGS ...)
COMMAND2(ARGS ...)
...
endif(expression)
Evaluates the given expression. If the result is true, the commands
in the THEN section are invoked. Otherwise, the commands in the else
section are invoked. The elseif and else sections are optional. You
may have multiple elseif clauses. Note that the expression in the
else and endif clause is optional. Long expressions can be used and
there is a traditional order of precedence. Parenthetical expressions
are evaluated first followed by unary operators such as EXISTS,
COMMAND, and DEFINED. Then any EQUAL, LESS, GREATER, STRLESS,
STRGREATER, STREQUAL, MATCHES will be evaluated. Then NOT operators
and finally AND, OR operators will be evaluated. Possible expressions
are:
if(<constant>)
True if the constant is 1, ON, YES, TRUE, Y, or a non-zero number.
False if the constant is 0, OFF, NO, FALSE, N, IGNORE, "", or ends in
the suffix '-NOTFOUND'. Named boolean constants are case-insensitive.
if(<variable>)
True if the variable's value is not a false constant.
if(NOT <expression>)
True if the expression is not true.
if(<expr1> AND <expr2>)
True if both expressions would be considered true individually.
if(<expr1> OR <expr2>)
True if either expression would be considered true individually.
if(COMMAND command-name)
True if the given name is a command, macro or function that can be
invoked.
if(POLICY policy-id)
True if the given name is an existing policy (of the form CMP<NNNN>).
if(TARGET target-name)
True if the given name is an existing target, built or imported.
if(EXISTS file-name)
if(EXISTS directory-name)
True if the named file or directory exists. Behavior is well-defined
only for full paths.
if(file1 IS_NEWER_THAN file2)
True if file1 is newer than file2 or if one of the two files doesn't
exist. Behavior is well-defined only for full paths.
if(IS_DIRECTORY directory-name)
True if the given name is a directory. Behavior is well-defined only
for full paths.
if(IS_ABSOLUTE path)
True if the given path is an absolute path.
if(variable MATCHES regex)
if(string MATCHES regex)
True if the given string or variable's value matches the given regular
expression.
if(variable LESS number)
if(string LESS number)
if(variable GREATER number)
if(string GREATER number)
if(variable EQUAL number)
if(string EQUAL number)
True if the given string or variable's value is a valid number and the
inequality or equality is true.
if(variable STRLESS string)
if(string STRLESS string)
if(variable STRGREATER string)
if(string STRGREATER string)
if(variable STREQUAL string)
if(string STREQUAL string)
True if the given string or variable's value is lexicographically less
(or greater, or equal) than the string or variable on the right.
if(version1 VERSION_LESS version2)
if(version1 VERSION_EQUAL version2)
if(version1 VERSION_GREATER version2)
Component-wise integer version number comparison (version format is
major[.minor[.patch[.tweak]]]).
if(DEFINED variable)
True if the given variable is defined. It does not matter if the
variable is true or false just if it has been set.
if((expression) AND (expression OR (expression)))
The expressions inside the parenthesis are evaluated first and then
the remaining expression is evaluated as in the previous examples.
Where there are nested parenthesis the innermost are evaluated as part
of evaluating the expression that contains them.
The if statement was written fairly early in CMake's history and it
has some convenience features that are worth covering. The if
statement reduces operations until there is a single remaining value,
at that point if the case insensitive value is: ON, 1, YES, TRUE, Y it
returns true, if it is OFF, 0, NO, FALSE, N, NOTFOUND, *-NOTFOUND,
IGNORE it will return false.
This is fairly reasonable. The convenience feature that sometimes
throws new authors is how CMake handles values that do not match the
true or false list. Those values are treated as variables and are
dereferenced even though they do not have the required ${} syntax.
This means that if you write
if (boobah)
CMake will treat it as if you wrote
if (${boobah})
likewise if you write
if (fubar AND sol)
CMake will conveniently treat it as
if ("${fubar}" AND "${sol}")
The later is really the correct way to write it, but the former will
work as well. Only some operations in the if statement have this
special handling of arguments. The specific details follow:
1) The left hand argument to MATCHES is first checked to see if it is
a defined variable, if so the variable's value is used, otherwise the
original value is used.
2) If the left hand argument to MATCHES is missing it returns false
without error
3) Both left and right hand arguments to LESS GREATER EQUAL are
independently tested to see if they are defined variables, if so their
defined values are used otherwise the original value is used.
4) Both left and right hand arguments to STRLESS STREQUAL STRGREATER
are independently tested to see if they are defined variables, if so
their defined values are used otherwise the original value is used.
5) Both left and right hand argumemnts to VERSION_LESS VERSION_EQUAL
VERSION_GREATER are independently tested to see if they are defined
variables, if so their defined values are used otherwise the original
value is used.
6) The right hand argument to NOT is tested to see if it is a boolean
constant, if so the value is used, otherwise it is assumed to be a
variable and it is dereferenced.
7) The left and right hand arguments to AND OR are independently
tested to see if they are boolean constants, if so they are used as
such, otherwise they are assumed to be variables and are dereferenced.
include
Read CMake listfile code from the given file.
include(<file|module> [OPTIONAL] [RESULT_VARIABLE <VAR>]
[NO_POLICY_SCOPE])
Reads CMake listfile code from the given file. Commands in the file
are processed immediately as if they were written in place of the
include command. If OPTIONAL is present, then no error is raised if
the file does not exist. If RESULT_VARIABLE is given the variable
will be set to the full filename which has been included or NOTFOUND
if it failed.
If a module is specified instead of a file, the file with name
<modulename>.cmake is searched in the CMAKE_MODULE_PATH.
See the cmake_policy() command documentation for discussion of the
NO_POLICY_SCOPE option.
list
List operations.
list(LENGTH <list> <output variable>)
list(GET <list> <element index> [<element index> ...]
<output variable>)
list(APPEND <list> <element> [<element> ...])
list(FIND <list> <value> <output variable>)
list(INSERT <list> <element_index> <element> [<element> ...])
list(REMOVE_ITEM <list> <value> [<value> ...])
list(REMOVE_AT <list> <index> [<index> ...])
list(REMOVE_DUPLICATES <list>)
list(REVERSE <list>)
list(SORT <list>)
LENGTH will return a given list's length.
GET will return list of elements specified by indices from the list.
APPEND will append elements to the list.
FIND will return the index of the element specified in the list or -1
if it wasn't found.
INSERT will insert elements to the list to the specified location.
REMOVE_AT and REMOVE_ITEM will remove items from the list. The
difference is that REMOVE_ITEM will remove the given items, while
REMOVE_AT will remove the items at the given indices.
REMOVE_DUPLICATES will remove duplicated items in the list.
REVERSE reverses the contents of the list in-place.
SORT sorts the list in-place alphabetically.
NOTES: A list in cmake is a ; separated group of strings. To create a
list the set command can be used. For example, set(var a b c d e)
creates a list with a;b;c;d;e, and set(var "a b c d e") creates a
string or a list with one item in it.
When specifying index values, if <element index> is 0 or greater, it
is indexed from the beginning of the list, with 0 representing the
first list element. If <element index> is -1 or lesser, it is indexed
from the end of the list, with -1 representing the last list element.
Be careful when counting with negative indices: they do not start from
0. -0 is equivalent to 0, the first list element.
macro
Start recording a macro for later invocation as a command.
macro(<name> [arg1 [arg2 [arg3 ...]]])
COMMAND1(ARGS ...)
COMMAND2(ARGS ...)
...
endmacro(<name>)
Define a macro named <name> that takes arguments named arg1 arg2 arg3
(...). Commands listed after macro, but before the matching endmacro,
are not invoked until the macro is invoked. When it is invoked, the
commands recorded in the macro are first modified by replacing formal
parameters (${arg1}) with the arguments passed, and then invoked as
normal commands. In addition to referencing the formal parameters you
can reference the values ${ARGC} which will be set to the number of
arguments passed into the function as well as ${ARGV0} ${ARGV1}
${ARGV2} ... which will have the actual values of the arguments
passed in. This facilitates creating macros with optional arguments.
Additionally ${ARGV} holds the list of all arguments given to the
macro and ${ARGN} holds the list of argument past the last expected
argument. Note that the parameters to a macro and values such as ARGN
are not variables in the usual CMake sense. They are string
replacements much like the c preprocessor would do with a macro. If
you want true CMake variables you should look at the function command.
See the cmake_policy() command documentation for the behavior of
policies inside macros.
make_directory
Deprecated. Use the file(MAKE_DIRECTORY ) command instead.
make_directory(directory)
Creates the specified directory. Full paths should be given. Any
parent directories that do not exist will also be created. Use with
care.
mark_as_advanced
Mark cmake cached variables as advanced.
mark_as_advanced([CLEAR|FORCE] VAR VAR2 VAR...)
Mark the named cached variables as advanced. An advanced variable
will not be displayed in any of the cmake GUIs unless the show
advanced option is on. If CLEAR is the first argument advanced
variables are changed back to unadvanced. If FORCE is the first
argument, then the variable is made advanced. If neither FORCE nor
CLEAR is specified, new values will be marked as advanced, but if the
variable already has an advanced/non-advanced state, it will not be
changed.
It does nothing in script mode.
math
Mathematical expressions.
math(EXPR <output variable> <math expression>)
EXPR evaluates mathematical expression and return result in the output
variable. Example mathematical expression is '5 * ( 10 + 13 )'.
Supported operators are + - * / % | & ^ ~ << >> * / %. They have the
same meaning as they do in c code.
message
Display a message to the user.
message([STATUS|WARNING|AUTHOR_WARNING|FATAL_ERROR|SEND_ERROR]
"message to display" ...)
The optional keyword determines the type of message:
(none) = Important information
STATUS = Incidental information
WARNING = CMake Warning, continue processing
AUTHOR_WARNING = CMake Warning (dev), continue processing
SEND_ERROR = CMake Error, continue but skip generation
FATAL_ERROR = CMake Error, stop all processing
The CMake command-line tool displays STATUS messages on stdout and all
other message types on stderr. The CMake GUI displays all messages in
its log area. The interactive dialogs (ccmake and CMakeSetup) show
STATUS messages one at a time on a status line and other messages in
interactive pop-up boxes.
CMake Warning and Error message text displays using a simple markup
language. Non-indented text is formatted in line-wrapped paragraphs
delimited by newlines. Indented text is considered pre-formatted.
option
Provides an option that the user can optionally select.
option(<option_variable> "help string describing option"
[initial value])
Provide an option for the user to select as ON or OFF. If no initial
value is provided, OFF is used.
remove
Deprecated. Use the list(REMOVE_ITEM ) command instead.
remove(VAR VALUE VALUE ...)
Removes VALUE from the variable VAR. This is typically used to remove
entries from a vector (e.g. semicolon separated list). VALUE is
expanded.
return
Return from a file, directory or function.
return()
Returns from a file, directory or function. When this command is
encountered in an included file (via include() or find_package()), it
causes processing of the current file to stop and control is returned
to the including file. If it is encountered in a file which is not
included by another file, e.g. a CMakeLists.txt, control is returned
to the parent directory if there is one. If return is called in a
function, control is returned to the caller of the function. Note
that a macro is not a function and does not handle return like a
function does.
separate_arguments
Parse space-separated arguments into a semicolon-separated list.
separate_arguments(<var> <UNIX|WINDOWS>_COMMAND "<args>")
Parses a unix- or windows-style command-line string "<args>" and
stores a semicolon-separated list of the arguments in <var>. The
entire command line must be given in one "<args>" argument.
The UNIX_COMMAND mode separates arguments by unquoted whitespace. It
recognizes both single-quote and double-quote pairs. A backslash
escapes the next literal character (\" is "); there are no special
escapes (\n is just n).
The WINDOWS_COMMAND mode parses a windows command-line using the same
syntax the runtime library uses to construct argv at startup. It
separates arguments by whitespace that is not double-quoted.
Backslashes are literal unless they precede double-quotes. See the
MSDN article "Parsing C Command-Line Arguments" for details.
separate_arguments(VARIABLE)
Convert the value of VARIABLE to a semi-colon separated list. All
spaces are replaced with ';'. This helps with generating command
lines.
set
Set a CMAKE variable to a given value.
set(<variable> <value>
[[CACHE <type> <docstring> [FORCE]] | PARENT_SCOPE])
Within CMake sets <variable> to the value <value>. <value> is
expanded before <variable> is set to it. If CACHE is present, then
the <variable> is put in the cache. <type> and <docstring> are then
required. <type> is used by the CMake GUI to choose a widget with
which the user sets a value. The value for <type> may be one of
FILEPATH = File chooser dialog.
PATH = Directory chooser dialog.
STRING = Arbitrary string.
BOOL = Boolean ON/OFF checkbox.
INTERNAL = No GUI entry (used for persistent variables).
If <type> is INTERNAL, then the <value> is always written into the
cache, replacing any values existing in the cache. If it is not a
cache variable, then this always writes into the current makefile.
The FORCE option will overwrite the cache value removing any changes
by the user.
If PARENT_SCOPE is present, the variable will be set in the scope
above the current scope. Each new directory or function creates a new
scope. This command will set the value of a variable into the parent
directory or calling function (whichever is applicable to the case at
hand).
If <value> is not specified then the variable is removed instead of
set. See also: the unset() command.
set(<variable> <value1> ... <valueN>)
In this case <variable> is set to a semicolon separated list of
values.
<variable> can be an environment variable such as:
set( ENV{PATH} /home/martink )
in which case the environment variable will be set.
set_directory_properties
Set a property of the directory.
set_directory_properties(PROPERTIES prop1 value1 prop2 value2)
Set a property for the current directory and subdirectories. If the
property is not found, CMake will report an error. The properties
include: INCLUDE_DIRECTORIES, LINK_DIRECTORIES,
INCLUDE_REGULAR_EXPRESSION, and ADDITIONAL_MAKE_CLEAN_FILES.
ADDITIONAL_MAKE_CLEAN_FILES is a list of files that will be cleaned as
a part of "make clean" stage.
set_property
Set a named property in a given scope.
set_property(<GLOBAL |
DIRECTORY [dir] |
TARGET [target1 [target2 ...]] |
SOURCE [src1 [src2 ...]] |
TEST [test1 [test2 ...]] |
CACHE [entry1 [entry2 ...]]>
[APPEND]
PROPERTY <name> [value1 [value2 ...]])
Set one property on zero or more objects of a scope. The first
argument determines the scope in which the property is set. It must
be one of the following:
GLOBAL scope is unique and does not accept a name.
DIRECTORY scope defaults to the current directory but another
directory (already processed by CMake) may be named by full or
relative path.
TARGET scope may name zero or more existing targets.
SOURCE scope may name zero or more source files.
TEST scope may name zero or more existing tests.
CACHE scope must name zero or more cache existing entries.
The required PROPERTY option is immediately followed by the name of
the property to set. Remaining arguments are used to compose the
property value in the form of a semicolon-separated list. If the
APPEND option is given the list is appended to any existing property
value.
site_name
Set the given variable to the name of the computer.
site_name(variable)
string
String operations.
string(REGEX MATCH <regular_expression>
<output variable> <input> [<input>...])
string(REGEX MATCHALL <regular_expression>
<output variable> <input> [<input>...])
string(REGEX REPLACE <regular_expression>
<replace_expression> <output variable>
<input> [<input>...])
string(REPLACE <match_string>
<replace_string> <output variable>
<input> [<input>...])
string(COMPARE EQUAL <string1> <string2> <output variable>)
string(COMPARE NOTEQUAL <string1> <string2> <output variable>)
string(COMPARE LESS <string1> <string2> <output variable>)
string(COMPARE GREATER <string1> <string2> <output variable>)
string(ASCII <number> [<number> ...] <output variable>)
string(CONFIGURE <string1> <output variable>
[@ONLY] [ESCAPE_QUOTES])
string(TOUPPER <string1> <output variable>)
string(TOLOWER <string1> <output variable>)
string(LENGTH <string> <output variable>)
string(SUBSTRING <string> <begin> <length> <output variable>)
string(STRIP <string> <output variable>)
string(RANDOM [LENGTH <length>] [ALPHABET <alphabet>]
[RANDOM_SEED <seed>] <output variable>)
REGEX MATCH will match the regular expression once and store the match
in the output variable.
REGEX MATCHALL will match the regular expression as many times as
possible and store the matches in the output variable as a list.
REGEX REPLACE will match the regular expression as many times as
possible and substitute the replacement expression for the match in
the output. The replace expression may refer to paren-delimited
subexpressions of the match using \1, \2, ..., \9. Note that two
backslashes (\\1) are required in CMake code to get a backslash
through argument parsing.
REPLACE will replace all occurrences of match_string in the input with
replace_string and store the result in the output.
COMPARE EQUAL/NOTEQUAL/LESS/GREATER will compare the strings and store
true or false in the output variable.
ASCII will convert all numbers into corresponding ASCII characters.
CONFIGURE will transform a string like CONFIGURE_FILE transforms a
file.
TOUPPER/TOLOWER will convert string to upper/lower characters.
LENGTH will return a given string's length.
SUBSTRING will return a substring of a given string.
STRIP will return a substring of a given string with leading and
trailing spaces removed.
RANDOM will return a random string of given length consisting of
characters from the given alphabet. Default length is 5 characters
and default alphabet is all numbers and upper and lower case letters.
If an integer RANDOM_SEED is given, its value will be used to seed the
random number generator.
The following characters have special meaning in regular expressions:
^ Matches at beginning of a line
$ Matches at end of a line
. Matches any single character
[ ] Matches any character(s) inside the brackets
[^ ] Matches any character(s) not inside the brackets
- Matches any character in range on either side of a dash
* Matches preceding pattern zero or more times
+ Matches preceding pattern one or more times
? Matches preceding pattern zero or once only
| Matches a pattern on either side of the |
() Saves a matched subexpression, which can be referenced
in the REGEX REPLACE operation. Additionally it is saved
by all regular expression-related commands, including
e.g. if( MATCHES ), in the variables CMAKE_MATCH_(0..9).
unset
Unset a variable, cache variable, or environment variable.
unset(<variable> [CACHE])
Removes the specified variable causing it to become undefined. If
CACHE is present then the variable is removed from the cache instead
of the current scope.
<variable> can be an environment variable such as:
unset(ENV{LD_LIBRARY_PATH})
in which case the variable will be removed from the current
environment.
variable_watch
Watch the CMake variable for change.
variable_watch(<variable name> [<command to execute>])
If the specified variable changes, the message will be printed about
the variable being changed. If the command is specified, the command
will be executed. The command will receive the following arguments:
COMMAND(<variable> <access> <value> <current list file> <stack>)
while
Evaluate a group of commands while a condition is true
while(condition)
COMMAND1(ARGS ...)
COMMAND2(ARGS ...)
...
endwhile(condition)
All commands between while and the matching endwhile are recorded
without being invoked. Once the endwhile is evaluated, the recorded
list of commands is invoked as long as the condition is true. The
condition is evaluated using the same logic as the if command.
write_file
Deprecated. Use the file(WRITE ) command instead.
write_file(filename "message to write"... [APPEND])
The first argument is the file name, the rest of the arguments are
messages to write. If the argument APPEND is specified, then the
message will be appended.
NOTE 1: file(WRITE ... and file(APPEND ... do exactly the same as
this one but add some more functionality.
NOTE 2: When using write_file the produced file cannot be used as an
input to CMake (CONFIGURE_FILE, source file ...) because it will lead
to an infinite loop. Use configure_file if you want to generate input
files to CMake.
------------------------------------------------------------------------------
Properties
CMake Properties - Properties supported by CMake, the Cross-Platform Makefile Generator.
This is the documentation for the properties supported by CMake. Properties
can have different scopes. They can either be assigned to a source file, a
directory, a target or globally to CMake. By modifying the values of
properties the behaviour of the build system can be customized.
------------------------------------------------------------------------------
Compatibility Commands
CMake Compatibility Listfile Commands - Obsolete commands supported by CMake for compatibility.
This is the documentation for now obsolete listfile commands from previous
CMake versions, which are still supported for compatibility reasons. You
should instead use the newer, faster and shinier new commands. ;-)
------------------------------------------------------------------------------
Standard CMake Modules
------------------------------------------------------------------------------
Copyright
Copyright 2000-2009 Kitware, Inc., Insight Software Consortium. All rights
reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
Neither the names of Kitware, Inc., the Insight Software Consortium, nor the
names of their contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
------------------------------------------------------------------------------
See Also
The following resources are available to get help using CMake:
Home Page
http://www.cmake.org
The primary starting point for learning about CMake.
Frequently Asked Questions
http://www.cmake.org/Wiki/CMake_FAQ
A Wiki is provided containing answers to frequently asked questions.
Online Documentation
http://www.cmake.org/HTML/Documentation.html
Links to available documentation may be found on this web page.
Mailing List
http://www.cmake.org/HTML/MailingLists.html
For help and discussion about using cmake, a mailing list is provided
at cmake@cmake.org. The list is member-post-only but one may sign up
on the CMake web page. Please first read the full documentation at
http://www.cmake.org before posting questions to the list.
Summary of helpful links:
Home: http://www.cmake.org
Docs: http://www.cmake.org/HTML/Documentation.html
Mail: http://www.cmake.org/HTML/MailingLists.html
FAQ: http://www.cmake.org/Wiki/CMake_FAQ